Study on Rheological Properties of SBS/Crumb Rubber Modified Direct Coal Liquefaction Residue Asphalt Prepared Through an Extraction–Blending Process
Materials · 08.07.2026 · 19 (14) · 2940
DOI: 10.3390/ma19142940 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.07.2026. Verfasst von Yongxiang Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Energy and Transportation Engineering, Inner Mongolia Agricultural University, Hohhot 010018, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Inner Mongolia Natural Science Foundation, Inner Mongolia Transportation Group Science and Technology Project, Fundamental Research Funds for the Universities.
Abstract (Originalsprache)
To address the insufficient low-temperature performance of asphalt modified with direct coal liquefaction residue (DCLR), this study proposed a composite modification strategy based on an extraction–blending process using styrene–butadiene–styrene (SBS) and crumb rubber (CR). The high- and low-temperature rheological properties, phase morphology, and functional-group characteristics of DCLR-blended asphalt with different formulations were systematically evaluated using a dynamic shear rheometer (DSR), a bending beam rheometer (BBR), fluorescence microscopy (FM), and Fourier transform infrared spectroscopy (FTIR). The results demonstrate that the combined addition of SBS and crumb rubber significantly enhances the high-temperature stability and elastic response of the asphalt. Specifically, formulation 5# (8 wt.% SBS and 10 wt.% CR) maintained a rutting factor of 1.007 kPa at 82 °C, indicating superior high-temperature rutting resistance. Meanwhile, this formulation satisfied the Superpave low-temperature requirements at −18 °C, achieving a balanced improvement in both high- and low-temperature performance. Microstructural analysis suggests that an appropriate SBS/CR ratio contributes to the formation of a relatively continuous and uniformly distributed polymer-rich phase, whereas excessive modifier contents may lead to rubber agglomeration and phase-structure imbalance. FTIR results showed that the characteristic absorption peaks of the modified binders were generally consistent with those of the base asphalt, and no obvious new absorption bands were observed. This indicates that the extraction–blending process mainly involved physical blending, swelling, and phase interaction rather than the formation of new covalent functional groups. This study provides a technical reference for the high-value utilization of DCLR and the development of high-performance modified asphalt.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Energy and Transportation Engineering, Inner Mongolia Agricultural University, Hohhot 010018, China.
- Inner Mongolia Transportation Group Co., Ltd., Hohhot 010051, China.
ORCID-Profile: Yongxiang Li, Yongjie Jia
Förderung
- Inner Mongolia Natural Science Foundation
- Inner Mongolia Transportation Group Science and Technology Project
- Fundamental Research Funds for the Universities
Zitieren
APA
Li, Y., Mi, S., Guo, C., Gao, J., Qi, Q., Jia, Y., & Li, J. (2026). Study on Rheological Properties of SBS/Crumb Rubber Modified Direct Coal Liquefaction Residue Asphalt Prepared Through an Extraction–Blending Process. Materials, 19(14), 2940. https://doi.org/10.3390/ma19142940
Vancouver
Li Y, Mi S, Guo C, Gao J, Qi Q, Jia Y, et al. Study on Rheological Properties of SBS/Crumb Rubber Modified Direct Coal Liquefaction Residue Asphalt Prepared Through an Extraction–Blending Process. Materials. 2026;19(14):2940. doi:10.3390/ma19142940
BibTeX
@article{Li2026,
author = {Li, Yongxiang and Mi, Shizhong and Guo, Chaoyang and Gao, Jian and Qi, Qi and Jia, Yongjie and Li, Jing},
title = {Study on Rheological Properties of SBS/Crumb Rubber Modified Direct Coal Liquefaction Residue Asphalt Prepared Through an Extraction–Blending Process},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {2940},
doi = {10.3390/ma19142940}
}
EUVIMED