EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cracking Performance of Fiber-Reinforced High-RAP Asphalt Mixtures Using IDEAL-CT

Aaditya Ojha iD, Hani Alzraiee iD, Ashraf Rahim iD, Shadi Saadeh, Chase Plager, Mohammad Doroudgar

Materials · 08.07.2026 · 19 (14) · 2936

DOI: 10.3390/ma19142936 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.07.2026. Verfasst von Aaditya Ojha und 5 weiteren Autor:innen. Beteiligte Einrichtung: Civil Engineering and Construction Engineering Management Department, California State University Long Beach, Long Beach, CA 90840, USA. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mineta Transportation Institute.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High reclaimed asphalt pavement (RAP) mixtures can improve pavement sustainability by reducing virgin binder and aggregate demand, but high RAP contents may increase mixture stiffness and reduce cracking tolerance. This study evaluates whether commercially available para-aramid fibers can improve the intermediate-temperature cracking resistance of high-RAP hot-mix asphalt using the IDEAL-CT test. Two para-aramid fiber products, a wax-coated fiber and an emulsion-treated fiber, were evaluated at dosages of 0.05%, 0.10%, and 0.15% by total mixture weight in asphalt mixtures containing 15%, 25%, and 40% RAP. The results showed that fiber effectiveness depended strongly on RAP content, fiber treatment, and dosage. The 25% RAP mixture had the lowest control CTIndex and showed the greatest improvement from fiber addition. In this group, 0.10% wax-coated fiber increased CTIndex by 170%, while 0.15% emulsion-treated fiber increased CTIndex by 263%. For the 15% RAP mixture, 0.05% emulsion-treated fiber and 0.10% wax-coated fiber produced statistically significant improvements. For the 40% RAP mixture, 0.10% emulsion-treated fiber produced the highest mean CTIndex among all mixtures tested, but the improvement was not statistically significant because of high specimen variability. Overall, the findings indicate that para-aramid fibers can improve laboratory cracking resistance in RAP mixtures, but the optimum dosage is mixture-specific and should not be applied uniformly across RAP contents. Because this study was limited to Ideal-CT, additional rutting, fatigue, aging, workability analysis and field validation are recommended before broad implementation.

Schlagwörter

Stichwörter der Autor:innen

Cracking Tolerance Index (CTI)Hot-Mix Asphalt (HMA)Polymer Fiber (PF)Reclaimed Asphalt Pavement (RAP)

Autor:innen und Institutionen

  • Civil Engineering and Construction Engineering Management Department, California State University Long Beach, Long Beach, CA 90840, USA.
  • Civil and Environmental Engineering Department, California Polytechnic State University, San Luis Obispo, CA 93407, USA.

ORCID-Profile: Aaditya Ojha, Hani Alzraiee, Ashraf Rahim

Förderung

  • Mineta Transportation Institute

Zitieren

APA

Ojha, A., Alzraiee, H., Rahim, A., Saadeh, S., Plager, C., & Doroudgar, M. (2026). Cracking Performance of Fiber-Reinforced High-RAP Asphalt Mixtures Using IDEAL-CT. Materials, 19(14), 2936. https://doi.org/10.3390/ma19142936

Vancouver

Ojha A, Alzraiee H, Rahim A, Saadeh S, Plager C, Doroudgar M. Cracking Performance of Fiber-Reinforced High-RAP Asphalt Mixtures Using IDEAL-CT. Materials. 2026;19(14):2936. doi:10.3390/ma19142936

BibTeX
@article{Ojha2026,
  author = {Ojha, Aaditya and Alzraiee, Hani and Rahim, Ashraf and Saadeh, Shadi and Plager, Chase and Doroudgar, Mohammad},
  title = {Cracking Performance of Fiber-Reinforced High-RAP Asphalt Mixtures Using IDEAL-CT},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {2936},
  doi = {10.3390/ma19142936}
}
Kostenlos starten →