Surface Damage Regeneration in Railway Wheels
Materials · 07.07.2026 · 19 (13) · 2930
DOI: 10.3390/ma19132930 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2026. Verfasst von Krzysztof Labisz und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Railway Transport, Faculty of Transport and Aviation Engineering, Silesian University of Technology, Krasinskiego 8 Str., 40-019 Katowi…. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study examines the applicability of Plasma Transferred Arc (PTA) surface treatment as an advanced technique for the refurbishment of railway wheel treads. Conventional wheel reprofiling, typically performed on semi-automatic lathes, requires the removal of a minimum of 6 mm of material from the running surface, which accelerates rim thinning and ultimately necessitates wheel replacement. Moreover, the reprofiled surfaces are not subjected to any subsequent treatment aimed at enhancing their durability. To overcome these limitations, PTA cladding was selected due to its ability to generate surface layers with superior mechanical and tribological properties. In contrast to widely used diode laser technologies, PTA enables the deposition of alloying materials in powder form, ensuring a stable, controllable, and efficient cladding process. The resulting microstructure consists of a heat-affected zone, a transition zone, and a re-melted zone, each exhibiting significantly increased hardness relative to the untreated base material. The process facilitates the incorporation of metallic particles into the surface layer, promoting the formation of a dense, wear-resistant coating. These materials possess huge potential utility regarding the wear resistance reaching even ca 10% of the base material wear in the case of 505 PTA and over 20% in the case of the 15 E material. The findings indicate that PTA surface treatment has substantial potential to extend the operational lifespan of railway wheels by providing a highly durable and mechanically robust surface, thereby reducing maintenance frequency and the associated costs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Railway Transport, Faculty of Transport and Aviation Engineering, Silesian University of Technology, Krasinskiego 8 Str., 40-019 Katowice, Poland.
- Faculty of Mechanical Engineering, Silesian University of Technology, Konarskiego 18A Str., 44-100 Gliwice, Poland.
- Laboratory of High Temperature Materials, Department of Metallurgical and Materials Engineering, Kocaeli University, 41001 İzmit, Türkiye.
ORCID-Profile: Krzysztof Labisz, Piotr Wilga, Jarosław Konieczny, Magdalena Polok-Rubiniec, Janusz Ćwiek, Mateusz Winter
Zitieren
APA
Labisz, K., Wilga, P., Konieczny, J., Włodarczyk-Fligier, A., Polok-Rubiniec, M., Atapek, Ş. H., Ćwiek, J., & Winter, M. (2026). Surface Damage Regeneration in Railway Wheels. Materials, 19(13), 2930. https://doi.org/10.3390/ma19132930
Vancouver
Labisz K, Wilga P, Konieczny J, Włodarczyk-Fligier A, Polok-Rubiniec M, Atapek ŞH, et al. Surface Damage Regeneration in Railway Wheels. Materials. 2026;19(13):2930. doi:10.3390/ma19132930
BibTeX
@article{Labisz2026,
author = {Labisz, Krzysztof and Wilga, Piotr and Konieczny, Jarosław and Włodarczyk-Fligier, Anna and Polok-Rubiniec, Magdalena and Atapek, Şaban Hakan and Ćwiek, Janusz and Winter, Mateusz},
title = {Surface Damage Regeneration in Railway Wheels},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2930},
doi = {10.3390/ma19132930}
}
EUVIMED