A Symmetry-Based Perspective Correction Method for High-Speed Deformation Analysis of Circular Blast-Loaded Plates
Materials · 07.07.2026 · 19 (13) · 2928
DOI: 10.3390/ma19132928 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2026. Verfasst von Edison Shehu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Politecnico di Milano, Dipartimento di Meccanica, Via La Masa, 1, 20156 Milan, Italy. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The objective of this study is to recover the transient out-of-plane displacement field of clamped circular plates subjected to blast loading using a single high-speed camera, as a low-cost alternative to stereo Digital Image Correlation (DIC) for the specific class of axisymmetrical structural responses of circular plates. The dynamic response of thin metal plates to blast loading is a fundamental problem in protective structural design, traditionally investigated through DIC. Although it provides full-field displacement measurements with high spatial resolution, it requires stereo camera arrangements, controlled illumination, speckle pattern preparation, and elaborate calibration procedures that significantly increase experimental cost and complexity. This study introduces a monocular optical method applicable to axisymmetrically defined material testing applications, such as the response of circularly supported isotropic plates under a uniform impulsive load, to recover the transient out-of-plane displacement field without using DIC. Clamped circular aluminum plates are subjected to blast loading generated by PG-3 charges of variable mass detonated at the closed end of a shock tube, with the exposed face matching the tube cross-section so as to enforce axisymmetric pressure load. A diametral reference line marked on the rear face of each specimen was recorded by a single high-speed camera, and a perspective correction derived from the axisymmetric deformed geometry was then applied to reconstruct the time-resolved displacement profile along the diameter. The permanent post-test deformed shape of each plate was subsequently digitized through 3D scanning and used as ground truth to validate the optical reconstruction. The reconstructed profiles closely matched the scans: for the conventional responses the root-mean-square error was 1.251 mm with a normalized mean residual of 6.57% (Case A) and 1.793 mm (9.20%, Case B), while for the anomalous counterintuitive response it was 1.043 mm (14.93%, Case C). Symmetry can thus be exploited as an active measurement principle to obtain quantitative blast-response data with substantially reduced experimental burden and without specialized stereo-optical instrumentation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Politecnico di Milano, Dipartimento di Meccanica, Via La Masa, 1, 20156 Milan, Italy.
- Structures and Effects of Explosions Department, Royal Military Academy, Av. de la Renaissance 30, B-1000 Brussels, Belgium.
- Department of Weapon Systems and Ballistics, Royal Military Academy, Av. de la Renaissance 30, B-1000 Brussels, Belgium.
ORCID-Profile: Edison Shehu, Georgios Kechagiadakis, Andrea Manes, David Lecompte
Zitieren
APA
Shehu, E., Kechagiadakis, G., Belkassem, B., Manes, A., Coghe, F., & Lecompte, D. (2026). A Symmetry-Based Perspective Correction Method for High-Speed Deformation Analysis of Circular Blast-Loaded Plates. Materials, 19(13), 2928. https://doi.org/10.3390/ma19132928
Vancouver
Shehu E, Kechagiadakis G, Belkassem B, Manes A, Coghe F, Lecompte D. A Symmetry-Based Perspective Correction Method for High-Speed Deformation Analysis of Circular Blast-Loaded Plates. Materials. 2026;19(13):2928. doi:10.3390/ma19132928
BibTeX
@article{Shehu2026,
author = {Shehu, Edison and Kechagiadakis, Georgios and Belkassem, Bachir and Manes, Andrea and Coghe, Frederik and Lecompte, David},
title = {A Symmetry-Based Perspective Correction Method for High-Speed Deformation Analysis of Circular Blast-Loaded Plates},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2928},
doi = {10.3390/ma19132928}
}
EUVIMED