EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation Study on the Mechanical Properties of Fuzz Buttons

Xiuping Dong, Zhongping Zhang, Mingji Huang iD

Materials · 07.07.2026 · 19 (13) · 2927

DOI: 10.3390/ma19132927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2026. Verfasst von Xiuping Dong und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Computer and Artificial Intelligence, University of Technology and Business Beijing, Beijing 100048, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fuzz buttons are formed by interweaving and compacting fine metallic wires, resulting in a highly porous architecture with complex internal contact interactions. Their compressive behavior is governed by the evolution of wire–wire contacts, frictional sliding, local bending, and plastic deformation, which cannot be adequately captured by conventional homogenized models. To address this limitation, a process-informed finite element modeling approach based on virtual fabrication is proposed. First, the spatial trajectories of 24 beryllium copper wires are generated using a parametric three-dimensional weaving algorithm and smoothed by cubic spline interpolation to obtain continuous wire centerlines. The resulting preform is then virtually compacted to reconstruct the densified wire network and its contact topology. The model employs a globally controlled solid-element mesh, a penalty-based general contact algorithm, a Coulomb friction model, and an explicit quasi-static solution scheme. The size-dependent plastic response of the fine wires is further incorporated through a Nix–Gao-based correction to the constitutive relation. The model is validated against quasi-static compression experiments at compressive strains of 15%, 20%, and 25%. The relative errors in the predicted peak forces are 2.12%, 5.65%, and 6.81%, respectively, while the corresponding coefficients of determination for the force–displacement curves are 0.984, 0.970, and 0.973. The model successfully reproduces the nonlinear loading–unloading response and hysteretic energy dissipation over the investigated strain range. The proposed approach provides a physically grounded numerical framework for predicting the compressive behavior of fuzz buttons and investigating the mesoscopic mechanics of complex interwoven wire networks.

Schlagwörter

Stichwörter der Autor:innen

damping and energy dissipationfuzz buttonmechanical performancemicrostructure modelsimulation method

Autor:innen und Institutionen

  • School of Computer and Artificial Intelligence, University of Technology and Business Beijing, Beijing 100048, China.
  • School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China.

ORCID-Profile: Mingji Huang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Dong, X., Zhang, Z., & Huang, M. (2026). Simulation Study on the Mechanical Properties of Fuzz Buttons. Materials, 19(13), 2927. https://doi.org/10.3390/ma19132927

Vancouver

Dong X, Zhang Z, Huang M. Simulation Study on the Mechanical Properties of Fuzz Buttons. Materials. 2026;19(13):2927. doi:10.3390/ma19132927

BibTeX
@article{Dong2026,
  author = {Dong, Xiuping and Zhang, Zhongping and Huang, Mingji},
  title = {Simulation Study on the Mechanical Properties of Fuzz Buttons},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2927},
  doi = {10.3390/ma19132927}
}
Kostenlos starten →