Ultra-High-Velocity Penetration Performance of Lightweight W-Based Ceramic Alloy Rod Penetrator Against Concrete Targets
Materials · 07.07.2026 · 19 (13) · 2924
DOI: 10.3390/ma19132924 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2026. Verfasst von Rui Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, China. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Open Research Fund of the State Key Laboratory of Target Vulnerability Assessment, Defense Engineering Institute, AMS, PLA, the Open Research Fund of Key Laboratory of Damage Technolog, the Open Research Fund of Key Laboratory of Damage Technology.
Abstract (Originalsprache)
Aiming at the reduction in penetration depth caused by the deformation and fracture of conventional 90W-Ni-Fe rod penetrators during ultra-high-velocity penetration, a lightweight tungsten-based ceramic alloy was fabricated in this study. Ballistics tests were conducted to verify the penetration performance of the novel lightweight alloy against concrete targets, and the existing theoretical penetration model was modified accordingly. The results indicate that, within the impact velocity range of 1400~1750 m/s, the penetration depth of both rod penetrators presents an initial increasing and subsequent decreasing trend, with an extreme value near 1625 m/s and a dimensionless penetration depth Xp/L close to 4. Compared with the traditional 90W-Ni-Fe alloy, the lightweight tungsten-based ceramic alloy penetrator achieves a mass reduction of 5.7%. In the impact velocity range from 1408.0 m/s to 1743.5 m/s, its penetration depth increases by 6.22%~10.58%, and the improvement becomes more significant with the increase in impact velocity. For the modified theoretical model, the predicted ultimate penetration depth of the lightweight alloy rod penetrator increases by 8.85%, while the average mass loss rate and average erosion rate decrease by 12.09% and 17.65%, respectively. The error between theoretical calculations and experimental data is within 5%.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051, China.
- Shate Key Laboratory of Target Vulnerability Assessment, Defense Engineering Institute, AMS, PLA, Luoyang 471000, China.
- School of Artificial Intelligence, Hebei University of Technology, Tianjin 300401, China.
- State Key Laboratory of Intelligent Power Distribution Equipment and System, Hebei University of Technology, Tianjin 300401, China.
ORCID-Profile: Rui Yang, Yun Zhu, Jianping Fu, Yupeng Guo
Förderung
- Open Research Fund of the State Key Laboratory of Target Vulnerability Assessment, Defense Engineering Institute, AMS, PLA
- the Open Research Fund of Key Laboratory of Damage Technolog
- the Open Research Fund of Key Laboratory of Damage Technology
Zitieren
APA
Yang, R., Zhu, Y., Fu, J., Ren, K., Guo, Y., Liu, S., & Ma, Y. (2026). Ultra-High-Velocity Penetration Performance of Lightweight W-Based Ceramic Alloy Rod Penetrator Against Concrete Targets. Materials, 19(13), 2924. https://doi.org/10.3390/ma19132924
Vancouver
Yang R, Zhu Y, Fu J, Ren K, Guo Y, Liu S, et al. Ultra-High-Velocity Penetration Performance of Lightweight W-Based Ceramic Alloy Rod Penetrator Against Concrete Targets. Materials. 2026;19(13):2924. doi:10.3390/ma19132924
BibTeX
@article{Yang2026,
author = {Yang, Rui and Zhu, Yun and Fu, Jianping and Ren, Kai and Guo, Yupeng and Liu, Shuai and Ma, Yuyu},
title = {Ultra-High-Velocity Penetration Performance of Lightweight W-Based Ceramic Alloy Rod Penetrator Against Concrete Targets},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2924},
doi = {10.3390/ma19132924}
}
EUVIMED