EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Liquid-to-Solid Ratio, Temperature, and Alkali Activator Concentration on Rheological Properties of Ternary Solid Waste Geopolymer

Liuyun Huang, Yingjie Zuo, Jiaquan Wang iD, Yuliang Chen iD, Tun Li

Materials · 07.07.2026 · 19 (13) · 2923

DOI: 10.3390/ma19132923 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2026. Verfasst von Liuyun Huang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering and Architecture, Guangxi University of Science and Technology, Liuzhou 545006, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Key Research and Development Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the rheological properties of geopolymer grouting materials, a systematic study was conducted on a slag–red mud–fly ash ternary solid waste geopolymer grouting material (TSWGGM). The effects of liquid-to-solid ratio (0.5–1.5), slurry temperature (10–50 °C), and alkali activator concentration (1.0–1.8 mol/L) on the rheological model, yield stress, time-dependent viscosity behavior, and thixotropy were examined. The results show that the liquid-to-solid ratio is the dominant factor determining the rheological model. With increasing liquid-to-solid ratio, the slurry exhibits Herschel–Bulkley (shear thinning), Bingham, and Newtonian fluid behaviors in sequence. The yield stress decreases significantly with increasing liquid-to-solid ratio and approaches zero at high liquid-to-solid ratios (≥1.0), while it increases with rising temperature. In the temperature range of 20–30 °C, the time-dependent viscosity curves follow an exponential growth law, whereas at 40–50 °C, competition between early reaction and shear destruction leads to an initial decrease followed by an increase in viscosity. At low alkali activator concentrations (≤1.4 mol/L), the time-dependent viscosity curves still obey the exponential model, but at excessively high concentrations (≥1.6 mol/L) a non-monotonic change (an initial increase followed by a decrease, and final steady growth) occurs. The thixotropic loop area decreases with increasing liquid-to-solid ratio, first decreases and then increases with rising temperature, and exhibits a critical phenomenon of first increasing and then decreasing with increasing alkali activator concentration.

Schlagwörter

Stichwörter der Autor:innen

alkali activator concentrationgeopolymer grouting materialliquid-to-solid ratiorheological propertiestemperature

Autor:innen und Institutionen

  • School of Civil Engineering and Architecture, Guangxi University of Science and Technology, Liuzhou 545006, China.

ORCID-Profile: Jiaquan Wang, Yuliang Chen

Förderung

  • Guangxi Key Research and Development Program

Zitieren

APA

Huang, L., Zuo, Y., Wang, J., Chen, Y., & Li, T. (2026). Effects of Liquid-to-Solid Ratio, Temperature, and Alkali Activator Concentration on Rheological Properties of Ternary Solid Waste Geopolymer. Materials, 19(13), 2923. https://doi.org/10.3390/ma19132923

Vancouver

Huang L, Zuo Y, Wang J, Chen Y, Li T. Effects of Liquid-to-Solid Ratio, Temperature, and Alkali Activator Concentration on Rheological Properties of Ternary Solid Waste Geopolymer. Materials. 2026;19(13):2923. doi:10.3390/ma19132923

BibTeX
@article{Huang2026,
  author = {Huang, Liuyun and Zuo, Yingjie and Wang, Jiaquan and Chen, Yuliang and Li, Tun},
  title = {Effects of Liquid-to-Solid Ratio, Temperature, and Alkali Activator Concentration on Rheological Properties of Ternary Solid Waste Geopolymer},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2923},
  doi = {10.3390/ma19132923}
}
Kostenlos starten →