EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Large Improvement of the Mechanical Strength of Carbon Nanotube Films by Joule Heating Dominated Post Treatments

Zujia Hu iD, Yifan Feng, Heng Zhang, Kangfei Liu, Xinran Cheng, Yunxiao Du, Jiannong Wang iD

Materials · 07.07.2026 · 19 (13) · 2917

DOI: 10.3390/ma19132917 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2026. Verfasst von Zujia Hu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon nanotube (CNT) films prepared via floating catalyst chemical vapor deposition generally suffer from residual iron impurities, structural defects, and weak inter-tube interfaces, which severely limit their mechanical performance. Here, we propose a post-treatment approach, which is dominated by Joule heating, to substantially improve the mechanical properties of CNT films. Acid washing after Joule heating effectively removes iron catalyst and amorphous carbon, increasing the specific strength from 0.64 N/tex to 2.96 N/tex. Pre-stretching induces alignment of the CNTs along the stretching direction, further raising the specific strength to 5.57 N/tex. Subsequent Joule heating not only raises graphitization degree and repairs lattice defects but also transforms the weak van der Waals contacts between tubes into continuous carbon networks, leading to network densification and locking of the aligned structure. The final specific strength reaches 7.04 N/tex and true tensile strength 8.05 GPa, surpassing previous representative carbon materials. The purification mechanism of Joule heating depends on the initial iron content of the film: for high-iron films, iron melts, migrates and forms Fe/Fe3C@C core–shell particles, which can be converted into hollow carbon shells via acid etching; for low-iron films, iron is removed via atomic diffusion and evaporation. This work provides a fast, controllable and synergistic technical route for the preparation of high-performance CNT macrostructures.

Schlagwörter

Stichwörter der Autor:innen

CNT assembliesdefect passivationinterfacial enhancementresistance heatingtensile performance

Autor:innen und Institutionen

  • School of Materials Science and Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China.
  • School of Mechanical and Power Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237, China.

ORCID-Profile: Zujia Hu, Jiannong Wang

Förderung

  • National Natural Science Foundation of China
  • National Key R&D Program of China

Zitieren

APA

Hu, Z., Feng, Y., Zhang, H., Liu, K., Cheng, X., Du, Y., & Wang, J. (2026). Large Improvement of the Mechanical Strength of Carbon Nanotube Films by Joule Heating Dominated Post Treatments. Materials, 19(13), 2917. https://doi.org/10.3390/ma19132917

Vancouver

Hu Z, Feng Y, Zhang H, Liu K, Cheng X, Du Y, et al. Large Improvement of the Mechanical Strength of Carbon Nanotube Films by Joule Heating Dominated Post Treatments. Materials. 2026;19(13):2917. doi:10.3390/ma19132917

BibTeX
@article{Hu2026,
  author = {Hu, Zujia and Feng, Yifan and Zhang, Heng and Liu, Kangfei and Cheng, Xinran and Du, Yunxiao and Wang, Jiannong},
  title = {Large Improvement of the Mechanical Strength of Carbon Nanotube Films by Joule Heating Dominated Post Treatments},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2917},
  doi = {10.3390/ma19132917}
}
Kostenlos starten →