Hybrid Local Fibers for Enhancing the Mechanical Properties of Engineered Cementitious Composites
Materials · 07.07.2026 · 19 (13) · 2908
DOI: 10.3390/ma19132908 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.07.2026. Verfasst von Xiaoyu Qiu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen 518060, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Production and Construction Group's Programs for Science and Technology Development, Pioneer R&D Program of Zhejiang Province-China, Zhejiang Provincial Natural Science Foundation of China.
Abstract (Originalsprache)
Engineered cementitious composites (ECCs) reinforced with imported polyvinyl alcohol (PVA) or polyethylene (PE) fibers exhibit high tensile deformability, but the fiber cost limits the wider application of ECCs. In this study, locally produced PVA and PE fibers were used to develop lower-cost ECC, and PVA–PE fiber hybridization was adopted to improve tensile deformability. Based on matrices with various fly ash volumes, the single-fiber pullout behavior was first investigated at the micromechanical level. The results showed that PVA and PE fibers failed mainly by rupture and pullout, respectively, and that the chemical bonding between PVA fibers and the surrounding matrix decreased with increasing fly ash volume. The effects of single-fiber addition and hybrid-fiber addition on the macromechanical properties of ECC were then examined. The results indicated that ECC reinforced with hybrid PVA–PE fibers exhibited enhanced tensile performance compared with ECC reinforced with either PVA or PE fibers alone, with an ultimate tensile strain exceeding 5.3%, an average crack width below 39 μm, and hybrid reinforcing effect coefficients of 1.17–1.30, indicating a positive hybrid effect. Overall, the lower-cost ECC incorporating hybrid local fibers developed in this study demonstrates promising tensile deformability and crack-control capacity.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering, Shenzhen University, Shenzhen 518060, China.
- Zhejiang Zheneng Technology & Environment Group Co., Ltd., Hangzhou 311121, China.
- School of Civil Engineering and Architecture, Zhejiang Sci-Tech University, Hangzhou 310018, China.
- State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310012, China.
Förderung
- Production and Construction Group's Programs for Science and Technology Development
- Pioneer R&D Program of Zhejiang Province-China
- Zhejiang Provincial Natural Science Foundation of China
- Production and Construction Group’s Programs for Science and Technology Development
Zitieren
APA
Qiu, X., Tang, L., Shi, Y., Li, H., & Wang, T. (2026). Hybrid Local Fibers for Enhancing the Mechanical Properties of Engineered Cementitious Composites. Materials, 19(13), 2908. https://doi.org/10.3390/ma19132908
Vancouver
Qiu X, Tang L, Shi Y, Li H, Wang T. Hybrid Local Fibers for Enhancing the Mechanical Properties of Engineered Cementitious Composites. Materials. 2026;19(13):2908. doi:10.3390/ma19132908
BibTeX
@article{Qiu2026,
author = {Qiu, Xiaoyu and Tang, Lina and Shi, Yucheng and Li, Hedong and Wang, Tao},
title = {Hybrid Local Fibers for Enhancing the Mechanical Properties of Engineered Cementitious Composites},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2908},
doi = {10.3390/ma19132908}
}
EUVIMED