Using Magnesium and Magnesium-Based Alloys as a Novel Biomaterial to Create Medical Devices by AM Techniques—A Review
Materials · 06.07.2026 · 19 (13) · 2890
DOI: 10.3390/ma19132890 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 06.07.2026. Verfasst von Corneliu Munteanu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, "Gheorghe Asachi" Technical University of Iasi, 63 D Mangeron Blvd, 700050 Iasi, Romania. Die Arbeit nennt 196 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Magnesium alloys are considered to be the third generation of biomaterials used in biomedical applications to promote bone tissue regeneration. Due to their Young’s modulus being similar to that of human bone and their release of magnesium ions that are antimicrobial and osteoinductive, these biomaterials not only promote bone regeneration, minimize the effects of stress shielding and reduce the risk of infection, but also their exceptional biocompatibility and bioresorbability eliminate the need for a second surgery to remove the implant. However, because magnesium has poor corrosion resistance, without different coatings and surface treatments, the implant can be compromised before the bone is fully healed. With additive manufacturing (AM) as a revolutionary technology, the one-size-fits-all approach can be replaced by fully personalized medicine, in which complex shapes can be created, designed, and processed with unique parameters for each patient. However, 3D printing of Mg-based devices remains particularly challenging due to magnesium’s high chemical reactivity, combustion risk, and low vaporization temperature, challenges that are further compounded when alloying elements are introduced. This review addresses this gap by critically examining the properties, corrosion behavior, and bio-medical performance of Mg and its alloys, with a focused analysis of selective laser melting (SLM) and wire arc additive manufacturing (WAAM) as key fabrication methods. The influence of processing parameters, microstructural defects, and alloy composition on the final properties of AM-fabricated Mg components is systematically discussed, alongside current limitations and prospective strategies toward their clinical translation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, "Gheorghe Asachi" Technical University of Iasi, 63 D Mangeron Blvd, 700050 Iasi, Romania.
- Technical Science Academy Romania, 26 Dacia Blvd, 030167 Bucharest, Romania.
- Department of Manufacturing Engineering, Technical University of Moldova, Bd. Stefan cel Mare 168.1, MD-2004 Chisinau, Moldova.
- Department of Manufacturing Engineering, University of Medicine and Pharmacy "Grigore T. Popa" of Iasi, Str. Universitatii 16, 700115 Iasi, Romania.
ORCID-Profile: Corneliu Munteanu, Boris Nazar, Fabian-Cezar Lupu
Zitieren
APA
Munteanu, C., Volocaru, I. I., Nazar, B., Lupu, F. C., Oprisan, B., Stan, I. A., Deleu, G., & Stan, G. (2026). Using Magnesium and Magnesium-Based Alloys as a Novel Biomaterial to Create Medical Devices by AM Techniques—A Review. Materials, 19(13), 2890. https://doi.org/10.3390/ma19132890
Vancouver
Munteanu C, Volocaru II, Nazar B, Lupu FC, Oprisan B, Stan IA, et al. Using Magnesium and Magnesium-Based Alloys as a Novel Biomaterial to Create Medical Devices by AM Techniques—A Review. Materials. 2026;19(13):2890. doi:10.3390/ma19132890
BibTeX
@article{Munteanu2026,
author = {Munteanu, Corneliu and Volocaru, Ioana-Ilinca and Nazar, Boris and Lupu, Fabian-Cezar and Oprisan, Bogdan and Stan, Ioana-Alexandra and Deleu, Grigorii and Stan, Gabriela},
title = {Using Magnesium and Magnesium-Based Alloys as a Novel Biomaterial to Create Medical Devices by AM Techniques—A Review},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2890},
doi = {10.3390/ma19132890}
}
EUVIMED