EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Force–Thermal Coupling Effects on Surface Integrity and Subsurface Damage of Al-50 wt% Si Alloy During Milling

Lu Jing, Fengjun Chen iD, Qiulin Niu iD, Qiu Hong, Jian Liu, Jiangnan Ding iD

Materials · 06.07.2026 · 19 (13) · 2885

DOI: 10.3390/ma19132885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.07.2026. Verfasst von Lu Jing und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Robot Engineering, Wenzhou University of Technology, Wenzhou 325000, China. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Department of Science and Technology of Hunan Province, Wenzhou University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Al-50 wt% Si alloy is widely used in aerospace and electronics but is hard to machine owing to uneven microstructure. To elucidate the relationship between force–thermal coupling effects and surface integrity during Al-50 wt% Si alloy milling, this paper established a stress model to reveal the superposition mechanism of mechanical and thermal stresses. Experiments were conducted to investigate the evolution of cutting forces and temperatures, as well as their influence on surface integrity characteristics, including microhardness, roughness, and chip morphology. The results showed that temperature increases steadily with vc, whereas cutting force fluctuates in an irregular manner. The maximum cutting temperature rises by 85.04% as vc increases from 25 m/min to 125 m/min. Meanwhile, the thermo-mechanical coupling effect exerts a regulatory role on chip morphology, where higher vc improves chip continuity and ductility. Surface integrity is determined by the competitive interplay between work hardening and thermal softening, and the surface microhardness varies from 168.49 HV to 173.27 HV. Specifically, elevated vc optimizes surface quality, with the Ra decreasing by 24.54%, whereas excessive fz and ap aggravate damage. Ultimately, surface defects arise from the combined removal behavior of Si particles and deformation of the Al matrix, while the inhomogeneous stress field induces subsurface damage.

Schlagwörter

Stichwörter der Autor:innen

Al-50 wt% Si alloychip morphologyforce–thermal couplingsubsurface damagessurface defectssurface integrity

Autor:innen und Institutionen

  • School of Robot Engineering, Wenzhou University of Technology, Wenzhou 325000, China.
  • School of Mechanical Engineering, Hunan University of Science and Technology, Xiangtan 411201, China.

ORCID-Profile: Fengjun Chen, Qiulin Niu, Jiangnan Ding

Förderung

  • National Natural Science Foundation of China
  • Department of Science and Technology of Hunan Province
  • Wenzhou University of Technology
  • Natural Science Foundation of Hunan Province
  • Youth Project of Wenzhou University of Technology

Zitieren

APA

Jing, L., Chen, F., Niu, Q., Hong, Q., Liu, J., & Ding, J. (2026). Force–Thermal Coupling Effects on Surface Integrity and Subsurface Damage of Al-50 wt% Si Alloy During Milling. Materials, 19(13), 2885. https://doi.org/10.3390/ma19132885

Vancouver

Jing L, Chen F, Niu Q, Hong Q, Liu J, Ding J. Force–Thermal Coupling Effects on Surface Integrity and Subsurface Damage of Al-50 wt% Si Alloy During Milling. Materials. 2026;19(13):2885. doi:10.3390/ma19132885

BibTeX
@article{Jing2026,
  author = {Jing, Lu and Chen, Fengjun and Niu, Qiulin and Hong, Qiu and Liu, Jian and Ding, Jiangnan},
  title = {Force–Thermal Coupling Effects on Surface Integrity and Subsurface Damage of Al-50 wt% Si Alloy During Milling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2885},
  doi = {10.3390/ma19132885}
}
Kostenlos starten →