EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Evolution of Pearlitic Wheel Steel Under Thermal–Mechanical Fatigue

Mingzhe Fan, Yuming Fu, Guang Li, Xiang Li iD, Sa Zhao, Zhifeng Li, Guanzhen Zhang, Chi Zhang

Materials · 06.07.2026 · 19 (13) · 2881

DOI: 10.3390/ma19132881 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 06.07.2026. Verfasst von Mingzhe Fan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Metals and Chemistry Research Institute, China Academy of Railway Sciences Corporation Limited, Beijing 100081, China. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China National Railway Group Science and Technology Program, China Academy of Railway Sciences Corporation Limited, Advanced Materials-National Science and Technology Major Project of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pearlitic wheel steel subjected to thermal–mechanical fatigue (TMF) during braking can undergo catastrophic fracture. This study clarifies the microstructural evolution governing the macroscopic cyclic hardening/softening behavior of pearlitic wheel steel under thermal–mechanical fatigue (TMF) with a constant mechanical strain range of −0.4% to +0.2%. At lower temperature amplitudes (200–500 °C), the geometrically necessary dislocation (GND) density reaches 20.4 × 1014/m2 during initial cycles, corresponding to cyclic hardening due to dislocation pile-ups at cementite lamellae interfaces. With increasing cycles, the GND density decreases to 12.3 × 1014/m2, concurrent with softening arising from lamellar bending/fracture, partial spheroidization, and dynamic recrystallization of ferrite. At higher temperature amplitudes (200–730 °C), the GND density decreases from 8.8 × 1014/m2 to 3.5 × 1014/m2, reflecting sustained cyclic softening dominated by thermally activated mechanisms, including cementite spheroidization and dislocation annihilation. The resulting softened microstructure consists of ferrite grains, intragranular dispersed cementite, and chain-like coarse cementite at boundaries. Unlike previous studies that focused on single loading conditions (e.g., thermal fatigue, rolling contact fatigue, or wear), the present work addresses the more complex TMF scenario and quantitatively elucidates the interplay between mechanical response and microstructural evolution in pearlitic steel. This work provides theoretical guidance for the development of a fatigue life prediction model for pearlitic wheels under braking.

Schlagwörter

Stichwörter der Autor:innen

cementitecyclic hardening/softeningdislocationpearlitic wheel steelthermal–mechanical fatigue

Autor:innen und Institutionen

  • Metals and Chemistry Research Institute, China Academy of Railway Sciences Corporation Limited, Beijing 100081, China.
  • Key Laboratory of Advanced Materials of Ministry of Education, School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China.
  • China Iron and Steel Research Institute Group Co., Ltd., Beijing 100081, China.

ORCID-Profile: Xiang Li

Förderung

  • China National Railway Group Science and Technology Program
  • China Academy of Railway Sciences Corporation Limited
  • Advanced Materials-National Science and Technology Major Project of China
  • Research Project of China Academy of Railway Sciences Corporation Limited

Zitieren

APA

Fan, M., Fu, Y., Li, G., Li, X., Zhao, S., Li, Z., Zhang, G., & Zhang, C. (2026). Microstructural Evolution of Pearlitic Wheel Steel Under Thermal–Mechanical Fatigue. Materials, 19(13), 2881. https://doi.org/10.3390/ma19132881

Vancouver

Fan M, Fu Y, Li G, Li X, Zhao S, Li Z, et al. Microstructural Evolution of Pearlitic Wheel Steel Under Thermal–Mechanical Fatigue. Materials. 2026;19(13):2881. doi:10.3390/ma19132881

BibTeX
@article{Fan2026,
  author = {Fan, Mingzhe and Fu, Yuming and Li, Guang and Li, Xiang and Zhao, Sa and Li, Zhifeng and Zhang, Guanzhen and Zhang, Chi},
  title = {Microstructural Evolution of Pearlitic Wheel Steel Under Thermal–Mechanical Fatigue},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2881},
  doi = {10.3390/ma19132881}
}
Kostenlos starten →