Synthesis and Characterization of Orange-Peel-Modified Particleboards Glued with Tannin-Based Resins
Materials · 04.07.2026 · 19 (13) · 2858
DOI: 10.3390/ma19132858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.07.2026. Verfasst von Nicola Rosa und 7 weiteren Autor:innen. Beteiligte Einrichtung: Land Environment Agriculture & Forestry Department, University of Padua, Viale dell'Università 16, 35020 Legnaro, Italy. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: funds of TESAF department and of the doctoral school LERH.
Abstract (Originalsprache)
The increasing demand for sustainable materials is driving research into the valorization of agro-industrial waste as lignocellulosic alternatives in engineered wood product manufacturing. This study investigates the use of bitter orange (Citrus aurantium L.) peel as a bio-based filler in particleboards bonded with a bio-based tannin/hexamine adhesive. Panels were fabricated by partially substituting wood chips with orange peel powder at five levels (0, 2.5, 5, 10, and 15 wt%), hot-pressed at 180 °C for 8 min at a constant biomass-to-adhesive ratio of 9:1 (w/w). Firstly, the effect of temperature on orange peels and then the microscopic structure of the composite was observed through optical stereomicroscopy and SEM. Then, mechanical performance, water resistance, and thermal conductivity were also analyzed. Substitution of up to 10 wt% of wood chips with orange peel allowed for the maintenance of internal bond strength, modulus of rupture, and modulus of elasticity, while the 2.5 wt% formulation yielded a statistically significant improvement in axial thermal insulation. Conversely, when the amount of orange waste rises over 10 wt%, significant decreases in internal bond and modulus of rupture were recorded. These findings demonstrate that C. aurantium peels can be used as a viable filler for formaldehyde-free particleboards, offering a promising strategy for orange waste valorization in the wood panel industry.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Land Environment Agriculture & Forestry Department, University of Padua, Viale dell'Università 16, 35020 Legnaro, Italy.
- Natural Bioresources Laboratory, Faculty of Nature and Life Sciences, Hassiba Benbouali University of Chlef, Route Nationale N°19, Ouled Fares 02180, Algeria.
- Industrial Engineering Department, University of Padua, Via Gradenigo 6/a, 35131 Padova, Italy.
- Technological Development Center, Federal University of Pelotas, Rua Gomes Carneiro 1, Pelotas 96010-610, Brazil.
ORCID-Profile: Nicola Rosa, Paola Cetera, Lorenzo Moro, Elena Colusso, Michela Zanetti, Lincoln Audrew Cordeiro, Gianluca Tondi
Förderung
- funds of TESAF department and of the doctoral school LERH
Zitieren
APA
Rosa, N., Cetera, P., Tsouri, F. Y., Moro, L., Colusso, E., Zanetti, M., Cordeiro, L. A., & Tondi, G. (2026). Synthesis and Characterization of Orange-Peel-Modified Particleboards Glued with Tannin-Based Resins. Materials, 19(13), 2858. https://doi.org/10.3390/ma19132858
Vancouver
Rosa N, Cetera P, Tsouri FY, Moro L, Colusso E, Zanetti M, et al. Synthesis and Characterization of Orange-Peel-Modified Particleboards Glued with Tannin-Based Resins. Materials. 2026;19(13):2858. doi:10.3390/ma19132858
BibTeX
@article{Rosa2026,
author = {Rosa, Nicola and Cetera, Paola and Tsouri, Fadwa Yassamine and Moro, Lorenzo and Colusso, Elena and Zanetti, Michela and Cordeiro, Lincoln Audrew and Tondi, Gianluca},
title = {Synthesis and Characterization of Orange-Peel-Modified Particleboards Glued with Tannin-Based Resins},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2858},
doi = {10.3390/ma19132858}
}
EUVIMED