Reduction of CO2 Emissions in Ceramic Production from Clay Raw Materials Containing Carbonates
Materials · 03.07.2026 · 19 (13) · 2851
DOI: 10.3390/ma19132851 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.07.2026. Verfasst von Wojciech Wons und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Building Materials Technology, Faculty of Materials Science and Ceramics, AGH University of Krakow, A. Mickiewicza Av. 30, 30-059 Krako…. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AGH University of Krakow, Minister of Science and Higher Education.
Abstract (Originalsprache)
The production of building ceramics is an energy-intensive part of the industry, causing high CO2 emission per production volume. In addition to the combustion of fossil fuels, CO2 is emitted as a byproduct of calcium carbonate decomposition, a compound present in clay raw materials. In this paper, a method for reducing emissions by lowering the firing temperature of ceramics, thereby preventing the complete decarbonation of carbonate minerals, is presented. Thermal research has shown that lowering the firing temperature to 750 °C resulted in a 55% calcium carbonate decomposition and a reduction in CO2 emissions by over 30 kg for every ton of clay used. At this temperature, sintering shrinkage mechanisms were not observed, which resulted in a reduction in the strength of the materials by almost 25% compared to samples fired at 900 °C. An attempt was made to compensate for the negative effects of lowering the firing temperature by adding ground glass cullet, which brought only partially positive results: an increase in flexural strength, but no change in compressive strength. Microscopic observations and phase composition studies indicate that lowering the firing temperature causes changes in the proportions of calcium compounds: increased amounts of calcite, and decreased amounts of silicates and calcium aluminosilicates.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Building Materials Technology, Faculty of Materials Science and Ceramics, AGH University of Krakow, A. Mickiewicza Av. 30, 30-059 Krakow, Poland.
- Department of Ceramics and Refractories, Faculty of Materials Science and Ceramics, AGH University of Krakow, A. Mickiewicza Av. 30, 30-059 Krakow, Poland.
ORCID-Profile: Wojciech Wons, Karol Rzepa, Agnieszka Wojteczko
Förderung
- AGH University of Krakow
- Minister of Science and Higher Education
Zitieren
APA
Wons, W., Rzepa, K., & Wojteczko, A. (2026). Reduction of CO2 Emissions in Ceramic Production from Clay Raw Materials Containing Carbonates. Materials, 19(13), 2851. https://doi.org/10.3390/ma19132851
Vancouver
Wons W, Rzepa K, Wojteczko A. Reduction of CO2 Emissions in Ceramic Production from Clay Raw Materials Containing Carbonates. Materials. 2026;19(13):2851. doi:10.3390/ma19132851
BibTeX
@article{Wons2026,
author = {Wons, Wojciech and Rzepa, Karol and Wojteczko, Agnieszka},
title = {Reduction of CO2 Emissions in Ceramic Production from Clay Raw Materials Containing Carbonates},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2851},
doi = {10.3390/ma19132851}
}
EUVIMED