A Calibrated Modelling Approach for Predicting Dry Friction Wear of Copper-Free Composite Friction Materials
Materials · 02.07.2026 · 19 (13) · 2831
DOI: 10.3390/ma19132831 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 02.07.2026. Verfasst von Grzegorz Mieczkowski und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, Bialystok University of Technology, 45A Wiejska Str., 15-351 Bialystok, Poland. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Faculty of Mechanical Engineering Bialystok University of Technology.
Abstract (Originalsprache)
This study presents a calibrated modelling approach for predicting the abrasive wear of copper-free composite friction materials. Four formulations were analysed, including a copper-containing reference material and three experimental compositions in which copper was replaced by different aluminium/polytetrafluoroethylene ratios. Dry ball-cratering tests were performed to determine the apparent wear-rate coefficient under controlled laboratory conditions. The copper-containing reference material showed the lowest wear-rate coefficient, kc = 80.655 × 10−14 m2·N−1, whereas the copper-free formulations reached kc = 111.811 × 10−14 m2·N−1, 98.586 × 10−14 m2·N−1 and 90.579 × 10−14 m2·N−1 for S2, S3 and S4, respectively. Thus, copper replacement increased the apparent wear-rate coefficient by approximately 12–39%, depending on the Al/PTFE ratio. The obtained data were used to develop and compare four calibrated predictive models. Among them, the modified Hertz–Archard model, which included effective hardness and contact-related descriptors, provided the best agreement with the experimental data. This model achieved MAPE = 1.5%, RMSE = 2.181 × 10−14 m2·N−1 and a maximum absolute error of 4.3%, with all predictions within the ±5% error band. The results indicate that the proposed calibration framework can support preliminary screening and ranking of copper-free friction-material formulations under the adopted dry ball-cratering conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering, Bialystok University of Technology, 45A Wiejska Str., 15-351 Bialystok, Poland.
ORCID-Profile: Grzegorz Mieczkowski, Andrzej Borawski, Dariusz Szpica
Förderung
- Faculty of Mechanical Engineering Bialystok University of Technology
Zitieren
APA
Mieczkowski, G., Borawski, A., & Szpica, D. (2026). A Calibrated Modelling Approach for Predicting Dry Friction Wear of Copper-Free Composite Friction Materials. Materials, 19(13), 2831. https://doi.org/10.3390/ma19132831
Vancouver
Mieczkowski G, Borawski A, Szpica D. A Calibrated Modelling Approach for Predicting Dry Friction Wear of Copper-Free Composite Friction Materials. Materials. 2026;19(13):2831. doi:10.3390/ma19132831
BibTeX
@article{Mieczkowski2026,
author = {Mieczkowski, Grzegorz and Borawski, Andrzej and Szpica, Dariusz},
title = {A Calibrated Modelling Approach for Predicting Dry Friction Wear of Copper-Free Composite Friction Materials},
journal = {Materials},
year = {2026},
volume = {19},
number = {13},
pages = {2831},
doi = {10.3390/ma19132831}
}
EUVIMED