EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fluid–Thermal–Structure Coupled Analysis on the Tempering Characteristics of Glassware During Air Cooling

Kang An, Hao Zheng, Chi Qin, Pengfei Zhang, Yajing Zhang, Wenbin Dong

Materials · 01.07.2026 · 19 (13) · 2794

DOI: 10.3390/ma19132794 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 01.07.2026. Verfasst von Kang An und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Intelligent Manufacturing, Anhui Science and Technology University, Chuzhou 239000, China. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Anhui Fengyang Huaihe Glass Co., Ltd, the Joint Postgraduate Training Demonstration Base of Anhui Science and Technology University and Anhui Fengyang Huaihe Glass Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Physical tempering is widely used to enhance the mechanical strength and thermal stability of glassware. Traditional numerical studies commonly adopt the uniform heat transfer coefficient assumption, which significantly deviates from the actual non-uniform jet cooling conditions, especially for glassware with complex three-dimensional curved surfaces. In this work, a fluid–thermal–structure sequential coupling numerical model for low-borosilicate glassware was developed using STAR-CCM+. The Realizable k-ε turbulence model, temperature-dependent thermophysical properties of glass and air, and transient non-uniform convective heat transfer boundaries were employed. Flow characteristics, heat transfer behavior, and residual stress distribution during air cooling were systematically investigated. The simulation results were verified using a polarizing stress instrument. Results indicate that obvious flow separation and vortices occur at the curved regions, resulting in highly non-uniform heat transfer. Temperature uniformity first decreases and then rebounds, while stress uniformity finally stabilizes above 90%. The through-thickness stress exhibits a parabolic profile with surface compression and internal tension. The maximum relative error between simulation and experiment is below 6%, demonstrating the reasonable engineering accuracy of the sequential coupling framework. Ultimately, these numerical observations quantify the fluid–thermal–structural interactions and underscore the critical importance of integrating realistic non-uniform aerodynamic boundaries.

Schlagwörter

Stichwörter der Autor:innen

fluid–thermal–structure couplingglasswareheat transfer uniformitynumerical simulationphysical temperingresidual stress

Autor:innen und Institutionen

  • College of Intelligent Manufacturing, Anhui Science and Technology University, Chuzhou 239000, China.

Förderung

  • Anhui Fengyang Huaihe Glass Co., Ltd
  • the Joint Postgraduate Training Demonstration Base of Anhui Science and Technology University and Anhui Fengyang Huaihe Glass Co., Ltd.

Zitieren

APA

An, K., Zheng, H., Qin, C., Zhang, P., Zhang, Y., & Dong, W. (2026). Fluid–Thermal–Structure Coupled Analysis on the Tempering Characteristics of Glassware During Air Cooling. Materials, 19(13), 2794. https://doi.org/10.3390/ma19132794

Vancouver

An K, Zheng H, Qin C, Zhang P, Zhang Y, Dong W. Fluid–Thermal–Structure Coupled Analysis on the Tempering Characteristics of Glassware During Air Cooling. Materials. 2026;19(13):2794. doi:10.3390/ma19132794

BibTeX
@article{An2026,
  author = {An, Kang and Zheng, Hao and Qin, Chi and Zhang, Pengfei and Zhang, Yajing and Dong, Wenbin},
  title = {Fluid–Thermal–Structure Coupled Analysis on the Tempering Characteristics of Glassware During Air Cooling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2794},
  doi = {10.3390/ma19132794}
}
Kostenlos starten →