EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Vitro Comparison of Mechanical and Esthetic Properties of Different Universal-Shade Resin Composites After Simulated Aging

Md Sofiqul Islam iD, Smriti Aryal A C iD, Mohamed Ahmed Elsayed iD, Vivek Padmanabhan, Misbah Sultana iD, Nada Tawfig Hashim iD, Upoma Guha, Muhammed Mustahsen Rahman

Materials · 30.06.2026 · 19 (13) · 2778

DOI: 10.3390/ma19132778 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.06.2026. Verfasst von Md Sofiqul Islam und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Operative Dentistry, RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al-Khaimah P.O. Box 12973, United …. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Universal-shade resin composites (USRCs) have gained popularity for their simplified shade-matching and reduced chairside time. However, their long-term performance under oral environmental stresses remains uncertain. This study aimed to compare the mechanical and esthetic properties of five commercially available single-shade resin composites and one conventional micro-hybrid resin composite (MHRC) after simulated aging.

Methods

A total of 18 disc-shaped specimens (10 mm circular × 3 mm thick) were prepared from five USRCs (Omnichroma, Zenchroma, A-Uno, TRANSCEND, and Ecosite One) and one MHRC (Clearfil AP-X). The polymerized specimen disk was polished using 2500 grit SIC paper. The mechanical properties, Vickers microhardness (HV), elastic modulus (EM) and creep (CR), and the esthetic properties, color and gloss, were measured after 24 h water storage and after 1-year stimulated aging. The data was analyzed using SPSS 27.0 software. A significance level of α = 0.05 was used for all statistical analyses.

Results

Both the aging and types of material showed a significant effect on the mechanical and esthetic properties of the tested resin composite materials. The MHRC showed a significantly higher HV and EM compared to the USRC (p < 0.05). The MHRC showed significantly lower CR compared to USRC (p < 0.05). The color retention of USRCs was comparable to the MHRC (p > 0.05) and some USRCs showed superior gloss values compared with MHRC (p < 0.05). The solubility of USREs were comparable to MHRC (p > 0.05) except A-Uno which showed significantly higher solubility compared to MHRC (p < 0.05).

Conclusions

Within the limitations of this in vitro study, it concludes that the USRC possesses inferior mechanical properties compared with the convention MHRC. Thus, their use should be limited when strong and durable mechanical properties are required under heavy occlusal stress. The use of USRCs could be beneficial for achieving a highly esthetic outcome of the restoration that does not includes the area that comes under heavy occlusal stress.

Schlagwörter

Stichwörter der Autor:innen

colorcreepdurabilityelastic modulusglosshardnessmicro-hybrid resin compositesolubilitythermocyclinguniversal-shade resin composite

Autor:innen und Institutionen

  • Department of Operative Dentistry, RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al-Khaimah P.O. Box 12973, United Arab Emirates.
  • Department of Oral and Craniofacial Health Sciences, College of Dental Medicine, University of Sharjah, Sharjah P.O. Box 27272, United Arab Emirates.
  • Department of Endodontics, RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al-Khaimah P.O. Box 12973, United Arab Emirates.
  • Department of Endodontics, Faculty of Dentistry, Assiut University, Assiut 71516, Egypt.
  • Department of Pediatric Dentistry, RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al-Khaimah P.O. Box 12973, United Arab Emirates.
  • Research Center, RAK College of Dental Sciences, RAK Medical and Health Sciences University, Ras Al-Khaimah P.O. Box 12973, United Arab Emirates.

ORCID-Profile: Md Sofiqul Islam, Smriti Aryal A C, Mohamed Ahmed Elsayed, Misbah Sultana, Nada Tawfig Hashim

Zitieren

APA

Islam, M. S., Aryal A C, S., Elsayed, M. A., Padmanabhan, V., Sultana, M., Hashim, N. T., Guha, U., & Rahman, M. M. (2026). In Vitro Comparison of Mechanical and Esthetic Properties of Different Universal-Shade Resin Composites After Simulated Aging. Materials, 19(13), 2778. https://doi.org/10.3390/ma19132778

Vancouver

Islam MS, Aryal A C S, Elsayed MA, Padmanabhan V, Sultana M, Hashim NT, et al. In Vitro Comparison of Mechanical and Esthetic Properties of Different Universal-Shade Resin Composites After Simulated Aging. Materials. 2026;19(13):2778. doi:10.3390/ma19132778

BibTeX
@article{Islam2026,
  author = {Islam, Md Sofiqul and Aryal A C, Smriti and Elsayed, Mohamed Ahmed and Padmanabhan, Vivek and Sultana, Misbah and Hashim, Nada Tawfig and Guha, Upoma and Rahman, Muhammed Mustahsen},
  title = {In Vitro Comparison of Mechanical and Esthetic Properties of Different Universal-Shade Resin Composites After Simulated Aging},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2778},
  doi = {10.3390/ma19132778}
}
Kostenlos starten →