EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Cerium on the Mechanical Properties of Al–20Si Alloy

Liang Hu, Xiaoming Du, Haicheng Liang, Guanglin Zhu, Wenqi Han, Fengling Zhang, Junzhe Liu, Yiqiao Tang, Shuai Wang

Materials · 24.06.2026 · 19 (13) · 2707

DOI: 10.3390/ma19132707 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 24.06.2026. Verfasst von Liang Hu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the 2023 Research Support Fund for High-Level Talent Introduction at Shenyang Ligong University, the Natural Science Foundation of Liaoning Province, the Future Industry Frontier Technology Project in Liaoning Province in 2025.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The chemical modification of Al–20Si alloy in the case of incorporation of rare earth cerium (Ce) is investigated in this study, focusing on the resulting microstructure evolution and changes in mechanical properties and hardness before and after cerium modification. The microstructure of the cerium-modified alloy is composed of the aluminum matrix, eutectic silicon, and primary silicon phases, as well as the Al2Si2Ce phase, a cerium-containing solid solution, and the α-Al11Ce3 phase. It is worth noting that this study reports for the first time an unusual phenomenon in which the addition of cerium raises tensile strength of the alloy while concurrently decreasing its surface hardness. The increase in tensile strength is mainly ascribed to the refinement of primary silicon. On the contrary, the reduction of hardness is explained by the competition between Ce-induced toughening and solid solution strengthening, as well as the generation of the relatively soft α-Al11Ce3 phase. Mechanical properties at room temperature show that the greatest tensile strength of 153 ± 7 MPa is reached at a cerium concentration of 0.7 wt.%, while the corresponding elongation of the mechanical specimen is 1.36 ± 0.287. The fracture mechanism changes from cleavage fracture in the unmodified alloy to ductile fracture after Ce addition.

Schlagwörter

Stichwörter der Autor:innen

chemical modificationfracture mechanismhypereutectic Al–20Si alloysmechanical propertiesrare earth cerium

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Shenyang Ligong University, Shenyang 110159, China.
  • School of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, China.
  • School of Metallurgy, Northeastern University, Shenyang 110819, China.

Förderung

  • the 2023 Research Support Fund for High-Level Talent Introduction at Shenyang Ligong University
  • the Natural Science Foundation of Liaoning Province
  • the Future Industry Frontier Technology Project in Liaoning Province in 2025
  • the Key Research and Development Plan Projects of Liaoning Province
  • the Research Project of Education Department of Liaoning Province of China
  • 2023 Research Support Fund for High-Level Talent Introduction at Shenyang Ligong University
  • Natural Science Foundation of Liaoning Province
  • Future Industry Frontier Technology Project in Liaoning Province in 2025

Zitieren

APA

Hu, L., Du, X., Liang, H., Zhu, G., Han, W., Zhang, F., Liu, J., Tang, Y., & Wang, S. (2026). Effects of Cerium on the Mechanical Properties of Al–20Si Alloy. Materials, 19(13), 2707. https://doi.org/10.3390/ma19132707

Vancouver

Hu L, Du X, Liang H, Zhu G, Han W, Zhang F, et al. Effects of Cerium on the Mechanical Properties of Al–20Si Alloy. Materials. 2026;19(13):2707. doi:10.3390/ma19132707

BibTeX
@article{Hu2026,
  author = {Hu, Liang and Du, Xiaoming and Liang, Haicheng and Zhu, Guanglin and Han, Wenqi and Zhang, Fengling and Liu, Junzhe and Tang, Yiqiao and Wang, Shuai},
  title = {Effects of Cerium on the Mechanical Properties of Al–20Si Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2707},
  doi = {10.3390/ma19132707}
}
Kostenlos starten →