EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of Surface Integrity in Ultra-Precision Grinding of TiC-Reinforced Ti3SiC2 (MAX Phase Composite)

Dennis Patrick Wilhelm, Anh Tuan Vu iD, Cornelia Rojacher, Thomas E Weirich iD, Thomas Bergs

Materials · 23.06.2026 · 19 (13) · 2699

DOI: 10.3390/ma19132699 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 23.06.2026. Verfasst von Dennis Patrick Wilhelm und 4 weiteren Autor:innen. Beteiligte Einrichtung: Manufacturing Technology Institute (MTI), RWTH Aachen University, 52074 Aachen, Germany. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precision glass molding is an economical and resource-efficient method for manufacturing precision optics in a replicative way, offering advantages over conventional manufacturing methods, particularly for complex geometries. However, challenges arise due to different thermal expansion coefficients between the mold and the glass, which lead to shape deviations during the cooling process and require high compensation efforts. This study investigates the machining behavior during ultra-precision grinding of an innovative MAX phase composite whose coefficient of thermal expansion can be specifically adapted to that of glass. The aim is to evaluate the influences of varying process parameters and material configurations on surface integrity and the suitability of ultra-precision grinding for mold manufacturing in the context of precision glass molding. Systematic grinding tests were carried out and complemented by force measurements. The resulting surfaces were characterized using optical measurement technology and atomic force microscopy; in addition, the edge zone was analyzed using transmission electron microscopy. The results confirm the basic suitability of ultra-precision grinding for the MAX phase composite but point to potential subsurface damage that could limit its usability in precision glass molding.

Schlagwörter

Stichwörter der Autor:innen

MAX phasegrindingmoldprecision glass moldingsurface integrityultra-precision

Autor:innen und Institutionen

  • Manufacturing Technology Institute (MTI), RWTH Aachen University, 52074 Aachen, Germany.
  • Fraunhofer Institute for Production Technology IPT, 52074 Aachen, Germany.
  • Central Facility for Electron Microscopy (GFE), RWTH Aachen University, 52074 Aachen, Germany.

ORCID-Profile: Anh Tuan Vu, Thomas E Weirich

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Wilhelm, D. P., Vu, A. T., Rojacher, C., Weirich, T. E., & Bergs, T. (2026). Investigation of Surface Integrity in Ultra-Precision Grinding of TiC-Reinforced Ti3SiC2 (MAX Phase Composite). Materials, 19(13), 2699. https://doi.org/10.3390/ma19132699

Vancouver

Wilhelm DP, Vu AT, Rojacher C, Weirich TE, Bergs T. Investigation of Surface Integrity in Ultra-Precision Grinding of TiC-Reinforced Ti3SiC2 (MAX Phase Composite). Materials. 2026;19(13):2699. doi:10.3390/ma19132699

BibTeX
@article{Wilhelm2026,
  author = {Wilhelm, Dennis Patrick and Vu, Anh Tuan and Rojacher, Cornelia and Weirich, Thomas E and Bergs, Thomas},
  title = {Investigation of Surface Integrity in Ultra-Precision Grinding of TiC-Reinforced Ti3SiC2 (MAX Phase Composite)},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {13},
  pages = {2699},
  doi = {10.3390/ma19132699}
}
Kostenlos starten →