EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Atomic-Level Polishing of Single-Crystal Diamond Using a Combination of Reactive Ion Etching and Chemical Mechanical Polishing

Rongchen Zhang iD, Xiangbing Wang, Xuejian Cui, Yi Hong, Nan Jiang, Xiangdong Yang, Jian Yi iD

Materials · 22.06.2026 · 19 (12) · 2677

DOI: 10.3390/ma19122677 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 22.06.2026. Verfasst von Rongchen Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Marine Materials, Zhejiang Key Laboratory of Extreme-Environmental Material Surfaces and Interfaces, Ningbo Institut…. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Single-crystal diamond (SCD) is an ideal substrate material for semiconductor devices due to its extremely wide bandgap and exceptionally high thermal conductivity. However, diamond’s extreme hardness and chemical inertness pose challenges for the fabrication of ultra-smooth surfaces. Traditional polishing processes are not only inefficient but also prone to introducing subsurface defects, which severely degrade device performance. To address the above issues, this study proposes a hybrid polishing process combining reactive ion etching (RIE) surface modification with chemical mechanical polishing (CMP), which enables low-loss atomic-level processing of SCD. The study found that RIE treatment induces lattice disorder on the diamond surface, forming a sp2-hybridized amorphous carbon-modified layer. Compared to the sp3 structure of native diamond, this modified layer has lower hardness and is easier to remove. We conducted the verification of the optimized process using high-quality single-crystalline diamond (SCD) samples with an initial surface roughness Ra of 0.68 nm. Under the optimized RIE parameters (substrate bias power: 200 W, etching time: 600 s, gas flow ratio of Ar:O2:CF4 = 40:50:10), the surface roughness Ra was reduced to as low as 0.35 nm after 2 h of CMP treatment. Furthermore, systematic characterization of the SCD’s as-received surface, RIE-modified surface, and CMP-treated surface was performed using Raman spectroscopy and X-ray photoelectron spectroscopy (XPS), elucidating the “etching modification–mechanical removal” polishing mechanism.

Schlagwörter

Stichwörter der Autor:innen

atomic surfacechemical mechanical polishingreactive ion etchingsurface modification

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Marine Materials, Zhejiang Key Laboratory of Extreme-Environmental Material Surfaces and Interfaces, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences…
  • Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.
  • Institute of Micro/Nano Materials and Devices, Ningbo University of Technology, Ningbo 315211, China.

ORCID-Profile: Rongchen Zhang, Jian Yi

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Zhang, R., Wang, X., Cui, X., Hong, Y., Jiang, N., Yang, X., & Yi, J. (2026). Atomic-Level Polishing of Single-Crystal Diamond Using a Combination of Reactive Ion Etching and Chemical Mechanical Polishing. Materials, 19(12), 2677. https://doi.org/10.3390/ma19122677

Vancouver

Zhang R, Wang X, Cui X, Hong Y, Jiang N, Yang X, et al. Atomic-Level Polishing of Single-Crystal Diamond Using a Combination of Reactive Ion Etching and Chemical Mechanical Polishing. Materials. 2026;19(12):2677. doi:10.3390/ma19122677

BibTeX
@article{Zhang2026,
  author = {Zhang, Rongchen and Wang, Xiangbing and Cui, Xuejian and Hong, Yi and Jiang, Nan and Yang, Xiangdong and Yi, Jian},
  title = {Atomic-Level Polishing of Single-Crystal Diamond Using a Combination of Reactive Ion Etching and Chemical Mechanical Polishing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2677},
  doi = {10.3390/ma19122677}
}
Kostenlos starten →