EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dynamic Magnetostatic Energy Correction Based on Domain Area Evolution for Mesoscopic Hysteresis Modeling

Mengxing Li, Yao Ying, Jing Yu, Jingwu Zheng iD, Juan Li iD, Liang Qiao iD, Akihisa Inoue, Shenglei Che iD

Materials · 20.06.2026 · 19 (12) · 2659

DOI: 10.3390/ma19122659 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 20.06.2026. Verfasst von Mengxing Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In mesoscopic domain energy models of electrical steel sheets, the demagnetizing field Hd is usually held constant at its domain-wall-complete value throughout magnetization. This treatment overestimates the magnetostatic energy at intermediate states and distorts the simulated hysteresis loop. We introduce a field-dependent coefficient υH that scales the magnetostatic energy at each field step. The coefficient is calculated from the aligned-domain area measured by magneto-optical Kerr microscopy and is anchored at the negative coercivity point H = −Hc, where the macroscopic magnetization vanishes and the aligned-domain area S0 is minimal. The definition follows from the linear relation Hd ≈ Nd·M that holds during domain-wall motion. Measurements in two observation zones of a grain-oriented steel give consistent υH curves, confirming the repeatability of the method. When the correction is incorporated into an Assembly Domain Structure Model, the coercivity error drops from 113% to 9–22% relative to the experimental average, with the predicted value falling inside the experimental range, and the remanence error drops from 39.9% to 15–17%. The same correction, applied to a second grain-oriented steel of a different grade, likewise reduces the coercivity and remanence errors (to about 23% and 18%, respectively), confirming that the method is applicable across grades.

Schlagwörter

Stichwörter der Autor:innen

demagnetizing fielddomain areadomain energyelectrical steel sheethysteresis loopmagnetostatic energymesoscopic model

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou 310014, China.
  • Research Center of Magnetic and Electronic Materials, Zhejiang University of Technology, Hangzhou 310014, China.
  • International Institute of Green Materials, Josai International University, Togane 283-8555, Japan.

ORCID-Profile: Jingwu Zheng, Juan Li, Liang Qiao, Shenglei Che

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, M., Ying, Y., Yu, J., Zheng, J., Li, J., Qiao, L., Inoue, A., & Che, S. (2026). Dynamic Magnetostatic Energy Correction Based on Domain Area Evolution for Mesoscopic Hysteresis Modeling. Materials, 19(12), 2659. https://doi.org/10.3390/ma19122659

Vancouver

Li M, Ying Y, Yu J, Zheng J, Li J, Qiao L, et al. Dynamic Magnetostatic Energy Correction Based on Domain Area Evolution for Mesoscopic Hysteresis Modeling. Materials. 2026;19(12):2659. doi:10.3390/ma19122659

BibTeX
@article{Li2026,
  author = {Li, Mengxing and Ying, Yao and Yu, Jing and Zheng, Jingwu and Li, Juan and Qiao, Liang and Inoue, Akihisa and Che, Shenglei},
  title = {Dynamic Magnetostatic Energy Correction Based on Domain Area Evolution for Mesoscopic Hysteresis Modeling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2659},
  doi = {10.3390/ma19122659}
}
Kostenlos starten →