Effect of Aggregate Type on Noise Characteristics and Emissions During the Crushing Process
Materials · 19.06.2026 · 19 (12) · 2646
DOI: 10.3390/ma19122646 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.06.2026. Verfasst von Paweł Ciężkowski und 2 weiteren Autor:innen. Beteiligte Einrichtung: Division of Numerical Methods and Intelligent Structures, Faculty of Automotive and Construction Machinery Engineering, Warsaw University of Technolo…. Die Arbeit nennt 105 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
In processes related to the treatment of mineral materials, the crushing stage determines the ability to obtain the required particle-size fraction. At the same time, it is an exceptionally energy-intensive step (accounting for about 5% of global electricity consumption) and one that generates significant environmental impacts, particularly in the form of high noise levels and considerable dust emissions. This study focuses on acoustic issues associated with the operation of crushers equipped with materials of varying hardness. Noise level measurements were carried out and then compared with the machines’ operational parameters, such as reduction ratio, throughput, energy consumption, and grain-size distribution. The results indicate that the properties of the processed material have a significant influence on noise emission during the crushing process. The study included various types of materials, such as pebble, basalt, and granite (feed size 16–22 mm), as well as lower-strength materials, including aerated concrete, recycled concrete, and ceramic materials (average particle size of approximately 50 mm), enabling a comparative analysis under controlled operating conditions. The measured noise levels ranged from front position 105.3 dB and side position 105.2 dB, depending on the material type, with the highest values observed for [hard material, e.g., recycled concrete and basalt] and the lowest for [weak material, e.g., aerated concrete]. The differences between extreme cases reached up to the top position 107.6 dB, indicating a strong relationship between material properties and acoustic emission. These findings highlight the importance of material selection in crushing processes and provide a useful reference for reducing noise impact and improving the environmental performance of industrial aggregate production.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Division of Numerical Methods and Intelligent Structures, Faculty of Automotive and Construction Machinery Engineering, Warsaw University of Technology, Ludwika Narbutta 84 Street, 02-524 Warsaw, Poland.
- Division of Machine Design Fundamentals, Faculty of Automotive and Construction Machinery Engineering, Warsaw University of Technology, Ludwika Narbutta 84 Street, 02-524 Warsaw, Poland.
- Department of Geography, Harran University, Osmanbey Campus, 63050 Haliliye, Şanlıurfa, Turkey.
ORCID-Profile: Paweł Ciężkowski, Damian Markuszewski
Zitieren
APA
Ciężkowski, P., Markuszewski, D., & Şahinalp, M. S. (2026). Effect of Aggregate Type on Noise Characteristics and Emissions During the Crushing Process. Materials, 19(12), 2646. https://doi.org/10.3390/ma19122646
Vancouver
Ciężkowski P, Markuszewski D, Şahinalp MS. Effect of Aggregate Type on Noise Characteristics and Emissions During the Crushing Process. Materials. 2026;19(12):2646. doi:10.3390/ma19122646
BibTeX
@article{Cikowski2026,
author = {Ciężkowski, Paweł and Markuszewski, Damian and Şahinalp, Mehmet Sait},
title = {Effect of Aggregate Type on Noise Characteristics and Emissions During the Crushing Process},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2646},
doi = {10.3390/ma19122646}
}
EUVIMED