EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Temperature-Rise Suppression Concrete Incorporating Steel-Encapsulated SAP–Water Phase-Change Aggregates: Semi-Adiabatic Characterization, Adiabatic Temperature-Rise Prediction and Finite Element Assessment

Heng Yin, Tianheng Yuan iD, Zongjin Li, Zhenzhen Yin, Hong Yao, Fuqiang Wang

Materials · 18.06.2026 · 19 (12) · 2630

DOI: 10.3390/ma19122630 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.06.2026. Verfasst von Heng Yin und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Science, Faculty of Innovation Engineering, Macau University of Science and Technology, Avenida Wai Long, Taipa, Macao SAR …. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Innovation Plan Prospective Project of Kailuan (Group) Co., Ltd, Science and Technology Development Fund (FDCT), Macao SAR, Science and Technology Innovation Plan Prospective Project of Kailuan (Group) Co., Ltd..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Early-age temperature rise in mass concrete can generate substantial thermal gradients and increase the risk of cracking. In this study, a temperature-rise suppression concrete was developed by partially replacing conventional coarse aggregate with steel-encapsulated superabsorbent polymer (SAP)–water phase-change aggregates. Semi-adiabatic temperature-rise tests were conducted to characterize the early-age thermal response, and the corresponding adiabatic temperature-rise histories were reconstructed using a heat-loss compensation method. The results showed that the incorporation of steel-encapsulated SAP–water aggregates reduced the temperature rise and delayed the thermal peak under semi-adiabatic conditions. For SAP-15, the peak core temperature in the validated finite element simulation decreased from 51 °C to 44 °C, while the maximum adiabatic temperature rise decreased to 40.5 °C. Engineering-scale simulation of a bridge pile-cap foundation further showed reductions in internal peak temperature, temperature difference, and thermal stress. These findings demonstrate that steel-encapsulated SAP–water phase-change aggregates provide an effective material-based strategy for moderating early-age thermal accumulation and mitigating thermal cracking risk in mass concrete.

Schlagwörter

Stichwörter der Autor:innen

adiabatic temperature risefinite element simulationphase-change aggregatessteel-encapsulated SAP–water aggregatestemperature-rise suppression concrete

Autor:innen und Institutionen

  • Department of Engineering Science, Faculty of Innovation Engineering, Macau University of Science and Technology, Avenida Wai Long, Taipa, Macao SAR 999078, China.
  • Kailuan (Group) Limited Liability Corporation, Tangshan 063000, China.

ORCID-Profile: Tianheng Yuan

Förderung

  • Science and Technology Innovation Plan Prospective Project of Kailuan (Group) Co., Ltd
  • Science and Technology Development Fund (FDCT), Macao SAR
  • Science and Technology Innovation Plan Prospective Project of Kailuan (Group) Co., Ltd.

Zitieren

APA

Yin, H., Yuan, T., Li, Z., Yin, Z., Yao, H., & Wang, F. (2026). Temperature-Rise Suppression Concrete Incorporating Steel-Encapsulated SAP–Water Phase-Change Aggregates: Semi-Adiabatic Characterization, Adiabatic Temperature-Rise Prediction and Finite Element Assessment. Materials, 19(12), 2630. https://doi.org/10.3390/ma19122630

Vancouver

Yin H, Yuan T, Li Z, Yin Z, Yao H, Wang F. Temperature-Rise Suppression Concrete Incorporating Steel-Encapsulated SAP–Water Phase-Change Aggregates: Semi-Adiabatic Characterization, Adiabatic Temperature-Rise Prediction and Finite Element Assessment. Materials. 2026;19(12):2630. doi:10.3390/ma19122630

BibTeX
@article{Yin2026,
  author = {Yin, Heng and Yuan, Tianheng and Li, Zongjin and Yin, Zhenzhen and Yao, Hong and Wang, Fuqiang},
  title = {Temperature-Rise Suppression Concrete Incorporating Steel-Encapsulated SAP–Water Phase-Change Aggregates: Semi-Adiabatic Characterization, Adiabatic Temperature-Rise Prediction and Finite Element Assessment},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2630},
  doi = {10.3390/ma19122630}
}
Kostenlos starten →