EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Temperature Tribological Behavior and Wear Mechanisms of Stellite 6 Alloy

Kai Jiang, Hongbin Lu, Weijie Chen, Fei Sun, Zhe Luo, Xiaomeng Gu

Materials · 18.06.2026 · 19 (12) · 2629

DOI: 10.3390/ma19122629 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.06.2026. Verfasst von Kai Jiang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Computer Science and Software, Shenzhen University of Information Technology, Shenzhen 518172, China. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Basic Research Foundation, Guangdong Provincial Research Platform and Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The temperature-dependent wear behavior of a cobalt-based Stellite 6 alloy was investigated from room temperature (RT) to 800 °C using high-temperature reciprocating sliding tests. The friction coefficient decreases monotonically with increasing temperature, from about 0.56 ± 0.12 at RT to 0.26 ± 0.11 at 800 °C, whereas the wear rate exhibits a pronounced non-monotonic evolution. Specifically, the wear rate increases from 18.4 ± 1.5 × 10−6 mm3·N−1·m−1 at RT to a maximum of 54.8 ± 1.6 × 10−6 mm3·N−1·m−1 at 600 °C, followed by an anomalous reduction to 10.2 ± 1.5 × 10−6 mm3·N−1·m−1 at 800 °C, which is even lower than that at RT. Microstructural and elemental analyses indicate that this behavior is governed by the temperature-dependent evolution of oxide layers. At RT–600 °C, thin and mechanically unstable oxide films repeatedly form and fracture, promoting oxidation-assisted abrasive and adhesive wear. In contrast, at 800 °C, a continuous and dense oxide layer forms and acts as a stable tribo-oxide film, effectively suppressing severe material removal. These findings clarify the temperature-driven wear mechanism transition of Stellite 6 alloy under high-temperature sliding conditions.

Schlagwörter

Stichwörter der Autor:innen

Stellite 6 alloyhigh-temperature wearoxide tribofilmwear mechanism

Autor:innen und Institutionen

  • School of Computer Science and Software, Shenzhen University of Information Technology, Shenzhen 518172, China.
  • School of Materials Science and Engineering, Fujian University of Technology, Fuzhou 350118, China.
  • College of Intelligent Manufacturing, Hunan University of Science and Engineering, Yongzhou 425199, China.

Förderung

  • Shenzhen Basic Research Foundation
  • Guangdong Provincial Research Platform and Project

Zitieren

APA

Jiang, K., Lu, H., Chen, W., Sun, F., Luo, Z., & Gu, X. (2026). High-Temperature Tribological Behavior and Wear Mechanisms of Stellite 6 Alloy. Materials, 19(12), 2629. https://doi.org/10.3390/ma19122629

Vancouver

Jiang K, Lu H, Chen W, Sun F, Luo Z, Gu X. High-Temperature Tribological Behavior and Wear Mechanisms of Stellite 6 Alloy. Materials. 2026;19(12):2629. doi:10.3390/ma19122629

BibTeX
@article{Jiang2026,
  author = {Jiang, Kai and Lu, Hongbin and Chen, Weijie and Sun, Fei and Luo, Zhe and Gu, Xiaomeng},
  title = {High-Temperature Tribological Behavior and Wear Mechanisms of Stellite 6 Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2629},
  doi = {10.3390/ma19122629}
}
Kostenlos starten →