EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Amorphization–Densification Coupling Governs Hardness Enhancement in SPS-Consolidated Al–Fe–Nb–(Ni,Ti) Metastable Alloys

Nguyen Thi Hoang Oanh iD, Nguyen Hoang Viet iD

Materials · 18.06.2026 · 19 (12) · 2628

DOI: 10.3390/ma19122628 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.06.2026. Verfasst von Nguyen Thi Hoang Oanh und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Hanoi University of Science and Technology, No 1 Dai Co Viet, Mai, Hanoi 100000, Vietnam. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hanoi University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The coupled effects of Ni and Ti additions on amorphization, spark plasma sintering (SPS) response, and hardness evolution were investigated in Al-rich Al–Fe–Nb-based metastable alloys. Mechanically alloyed Al82Fe14Nb2Ni2, Al82Fe14Nb2Ti2, and Al82Fe12Nb2Ni2Ti2 powders showed progressive loss of long-range order, with the quinary alloy exhibiting the strongest amorphization tendency, consistent with its higher configurational entropy (5.420 J·mol−1·K−1) and more negative mixing enthalpy (−9.36 kJ·mol−1). SPS displacement analysis revealed that primary displacement contribution occurs during heating and is progressively limited by crystallization-induced stiffening. Consolidation at 500 °C produced amorphous–nanocrystalline composites containing Al13Fe4 and Al3Nb, whereas increasing the temperature to 550 °C promoted further devitrification. The highest hardness, 445.4 HV, was obtained for Al82Fe14Nb2Ni2, despite its lower amorphous-forming ability than the quinary alloy. This demonstrates that hardness is controlled not by maximum amorphization, but by the kinetic balance between amorphous retention, fine intermetallic precipitation, and densification efficiency. The results identify SPS as a coupled densification–transformation route for designing high-strength Al-based amorphous–nanocrystalline alloys.

Schlagwörter

Stichwörter der Autor:innen

Al-rich alloysamorphizationcrystallizationmechanical alloyingmicrohardnessspark plasma sintering

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Hanoi University of Science and Technology, No 1 Dai Co Viet, Mai, Hanoi 100000, Vietnam.

ORCID-Profile: Nguyen Thi Hoang Oanh, Nguyen Hoang Viet

Förderung

  • Hanoi University of Science and Technology

Zitieren

APA

Oanh, N. T. H., & Viet, N. H. (2026). Amorphization–Densification Coupling Governs Hardness Enhancement in SPS-Consolidated Al–Fe–Nb–(Ni,Ti) Metastable Alloys. Materials, 19(12), 2628. https://doi.org/10.3390/ma19122628

Vancouver

Oanh NTH, Viet NH. Amorphization–Densification Coupling Governs Hardness Enhancement in SPS-Consolidated Al–Fe–Nb–(Ni,Ti) Metastable Alloys. Materials. 2026;19(12):2628. doi:10.3390/ma19122628

BibTeX
@article{Oanh2026,
  author = {Oanh, Nguyen Thi Hoang and Viet, Nguyen Hoang},
  title = {Amorphization–Densification Coupling Governs Hardness Enhancement in SPS-Consolidated Al–Fe–Nb–(Ni,Ti) Metastable Alloys},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2628},
  doi = {10.3390/ma19122628}
}
Kostenlos starten →