EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Short-Term Creep Prediction Model for Composite Geomembranes with Varying Film Thicknesses

Yufan Hao, Xiaodong Wang, Sheng Feng, Jing Ma, Wu Yang, Shuhan Ma

Materials · 18.06.2026 · 19 (12) · 2622

DOI: 10.3390/ma19122622 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.06.2026. Verfasst von Yufan Hao und 5 weiteren Autor:innen. Beteiligte Einrichtung: College of Hydraulic and Civil Engineering, Xinjiang Agricultural University, Urumqi 830052, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xinjiang Uygur Autonomous Region Natural Science Foundation Youth Fund, Xinjiang Uygur Autonomous Region Talent Development Fund “Tianchi Yingcai” Introduction Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Composite geomembranes (GMs) are widely used in seepage projects, where their long-term deformation properties are critical for structural safety and stability. This study conducted a 90-day creep test to compare the deformation behavior of composite GMs with varying thicknesses. Based on the long-term creep data of the composite GMs, the average values of the model parameters and the variation rules of the coefficients of variation were analyzed. When the coefficients of variation for the creep exponent a and initial strain value b were both below 10%, a short-term empirical creep model across different thickness levels was established. The accuracy and applicability of the model were analyzed by comparing its results with the measured values. The results show that the long-term deformation behavior of the composite GMs across various thicknesses aligns with a logarithmic function containing thickness-dependent coefficients. Additionally, increasing film thickness leads to reduction in the final stabilized strain. The proposed short-term model based on experimental data demonstrated reasonable agreement between the model’s 72 h fitted data and the experimental measurements. Consequently, this model may serve as a useful empirical method for predicting the long-term creep deformation of composite GMs.

Schlagwörter

Stichwörter der Autor:innen

composite geomembranecreep behaviorlogarithmic function modelshort-term prediction model

Autor:innen und Institutionen

  • College of Hydraulic and Civil Engineering, Xinjiang Agricultural University, Urumqi 830052, China.
  • Technical Research Center of Xinjiang Hydro-Geotechnical and Structural Engineering, Urumqi 830052, China.
  • Xinjiang Water Conservancy Development Investment (Group) Co., Ltd., Urumqi 830092, China.
  • Key Laboratory of Dam Construction Safety and Disaster Prevention of Xinjiang Production and Construction Corps, Urumqi 830004, China.

Förderung

  • Xinjiang Uygur Autonomous Region Natural Science Foundation Youth Fund
  • Xinjiang Uygur Autonomous Region Talent Development Fund “Tianchi Yingcai” Introduction Program

Zitieren

APA

Hao, Y., Wang, X., Feng, S., Ma, J., Yang, W., & Ma, S. (2026). Short-Term Creep Prediction Model for Composite Geomembranes with Varying Film Thicknesses. Materials, 19(12), 2622. https://doi.org/10.3390/ma19122622

Vancouver

Hao Y, Wang X, Feng S, Ma J, Yang W, Ma S. Short-Term Creep Prediction Model for Composite Geomembranes with Varying Film Thicknesses. Materials. 2026;19(12):2622. doi:10.3390/ma19122622

BibTeX
@article{Hao2026,
  author = {Hao, Yufan and Wang, Xiaodong and Feng, Sheng and Ma, Jing and Yang, Wu and Ma, Shuhan},
  title = {Short-Term Creep Prediction Model for Composite Geomembranes with Varying Film Thicknesses},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2622},
  doi = {10.3390/ma19122622}
}
Kostenlos starten →