Experimental Characterization and Numerical Assessment of Cu-Al-Be Shape Memory Alloys for U-Shaped Flexural Plates
Materials · 17.06.2026 · 19 (12) · 2617
DOI: 10.3390/ma19122617 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 17.06.2026. Verfasst von Catalina Santibañez und 4 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Ingeniería Mecánica, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso 2390123, Chile. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Agency for Research and Development, Universidad Nacional Autónoma de México, UNAM-PAPIIT.
Abstract (Originalsprache)
This study presents an experimental characterization and numerical assessment of Cu–Al–Be (CAB) shape memory alloys (SMAs) for potential applications in U-shaped flexural plate (UFP) seismic dampers. Six alloy compositions were evaluated through monotonic tensile tests, ASTM F2516 superelastic protocols, and increasing-amplitude cyclic loading to identify the material exhibiting stable superelastic behavior at room temperature. Among the tested materials, alloy CAB4.76-A showed the most favorable response, with high transformation stress, stable pseudoelastic behavior, and strain recovery exceeding 95% for strains up to 2.5%. A phenomenological finite element model based on the Auricchio constitutive formulation was calibrated using experimental data within the validated strain range (ε ≤ 0.025), showing good agreement in stiffness and stress prediction. The calibrated model was subsequently applied to simulate the response of a UFP device under orthogonal cyclic loading. The results indicate a strong dependence on loading orientation due to coupled bending–torsion effects, with the 90° direction exhibiting significantly higher strength and energy dissipation capacity. Comparison with analytical formulations originally developed for steel UFPs showed that these expressions provide approximate estimates when applied to SMA-based devices. The results suggest that Cu–Al–Be alloys are a promising alternative for UFP applications, while highlighting the importance of loading orientation and the need for future experimental validation at a device scale.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Ingeniería Mecánica, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso 2390123, Chile.
- Departamento de Obras Civiles, Universidad Técnica Federico Santa María, Av. España 1680, Valparaíso 2390123, Chile.
- Instituto de Investigación en Materiales, Universidad Nacional Autónoma de México (IMM-UNAM), Circuito Exterior S/N, Ciudad Universitaria, Ciudad de Mexico 04510, Mexico.
ORCID-Profile: Ramiro Bazáez, Yessica L Avila-Avila, Gabriel Lara-Rodríguez
Förderung
- National Agency for Research and Development
- Universidad Nacional Autónoma de México
- UNAM-PAPIIT
Zitieren
APA
Santibañez, C., Bazáez, R., Pérez, L., Avila-Avila, Y. L., & Lara-Rodríguez, G. (2026). Experimental Characterization and Numerical Assessment of Cu-Al-Be Shape Memory Alloys for U-Shaped Flexural Plates. Materials, 19(12), 2617. https://doi.org/10.3390/ma19122617
Vancouver
Santibañez C, Bazáez R, Pérez L, Avila-Avila YL, Lara-Rodríguez G. Experimental Characterization and Numerical Assessment of Cu-Al-Be Shape Memory Alloys for U-Shaped Flexural Plates. Materials. 2026;19(12):2617. doi:10.3390/ma19122617
BibTeX
@article{Santibaez2026,
author = {Santibañez, Catalina and Bazáez, Ramiro and Pérez, Luis and Avila-Avila, Yessica L and Lara-Rodríguez, Gabriel},
title = {Experimental Characterization and Numerical Assessment of Cu-Al-Be Shape Memory Alloys for U-Shaped Flexural Plates},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2617},
doi = {10.3390/ma19122617}
}
EUVIMED