EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bushing Wear Prediction of High-Speed Press Conditions

Alibek Yuldoshev iD, Inseo Kim, Joonhee Park iD, Junhee Chung, Taeyoung Im, Naksoo Kim iD

Materials · 17.06.2026 · 19 (12) · 2614

DOI: 10.3390/ma19122614 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.06.2026. Verfasst von Alibek Yuldoshev und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Sogang University, Seoul 04107, Republic of Korea. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy, Ministry of Trade, Industry & Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-speed press systems operate under severe dynamic loading conditions, where bushing components are subject to accelerated wear that directly affects system reliability and maintenance cost. Despite extensive studies on bearing wear in automotive and aerospace applications, wear behavior under high-speed press conditions remains insufficiently explored. This study proposes a wear prediction model that integrates experimental measurements with finite element analysis (FEA). A key hypothesis is that bushing wear under high-speed press conditions can be accurately described by an extended Archard wear model incorporating contact pressure distribution and shaft misalignment effects. A controlled experimental setup was developed to replicate real operating conditions. Wear profiles were measured using high-resolution profilometry, while corresponding contact pressure distributions were obtained via 3D FEA simulations. Model parameters were calibrated using a subset of experimental data and validated against independent test cases. The proposed model demonstrates strong predictive capability, achieving an RMSE of 0.98 μm and an MAE of 0.57 μm across the 30-min calibration cases under the average (AVG) load-cell calibration. The extended formulation captures the asymmetric wear patterns induced by misalignment and resolves the high-pressure peak underestimation observed in the plain Archard baseline.

Schlagwörter

Stichwörter der Autor:innen

archard wear modelbushing wearfinite element analysishigh-speed press systemprofilometry

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Sogang University, Seoul 04107, Republic of Korea.

ORCID-Profile: Alibek Yuldoshev, Joonhee Park, Naksoo Kim

Förderung

  • Ministry of Trade, Industry and Energy
  • Ministry of Trade, Industry & Energy

Zitieren

APA

Yuldoshev, A., Kim, I., Park, J., Chung, J., Im, T., & Kim, N. (2026). Bushing Wear Prediction of High-Speed Press Conditions. Materials, 19(12), 2614. https://doi.org/10.3390/ma19122614

Vancouver

Yuldoshev A, Kim I, Park J, Chung J, Im T, Kim N. Bushing Wear Prediction of High-Speed Press Conditions. Materials. 2026;19(12):2614. doi:10.3390/ma19122614

BibTeX
@article{Yuldoshev2026,
  author = {Yuldoshev, Alibek and Kim, Inseo and Park, Joonhee and Chung, Junhee and Im, Taeyoung and Kim, Naksoo},
  title = {Bushing Wear Prediction of High-Speed Press Conditions},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2614},
  doi = {10.3390/ma19122614}
}
Kostenlos starten →