EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimized Interfacial Layers for High-Adhesion and Damp-Heat-Resistant Cu Meshes with Aperiodic Geometries on PET Substrates

Xiao Lu, Jia Li, Biyou Bao, Chengli Zhang, Qiang Wang, Guanglong Xu, Xianfa Rao, Hongliang Zhang iD, Weijie Song iD

Materials · 17.06.2026 · 19 (12) · 2608

DOI: 10.3390/ma19122608 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.06.2026. Verfasst von Xiao Lu und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the "Pioneer" and "Leading Goose" R&D Program of Zhejiang, “Pioneer” and “Leading Goose” R&D Program of Zhejiang.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Copper (Cu) thin films and meshes on polyethylene terephthalate (PET) substrates are promising flexible transparent conductive electrodes (TCEs), yet their practical use is limited by insufficient interfacial adhesion and poor oxidative stability on inert polymer substrates. This work addresses these issues via a synergistic strategy of interfacial layer engineering and maskless laser lithography-based aperiodic mesh patterning, systematically comparing ceramic (Al2O3) and metallic (NiCr) interfacial layers for PET-supported Cu films and fabricating Linear/Sinusoidal aperiodic Cu meshes with tailored performance. Magnetron sputtering shows that Ar plasma-activated NiCr interfacial layers form a gradient-alloyed interface with Cu via interdiffusion, achieving 5B-level adhesion, mitigating bending-induced stress concentration, and enhancing damp-heat resistance (85 °C/85% RH) by suppressing oxidation—outperforming brittle Al2O3 layers. Patterning the optimized Cu/NiCr/PET structure into micrometer-scale meshes yields a Linear design with superior optoelectronic performance (~10.8 Ω/sq sheet resistance, >87% transmittance at 550 nm) and a Sinusoidal design with enhanced bending robustness via stress delocalization. Microstructural and elemental analyses clarify the NiCr layer’s interfacial toughening and anti-oxidation mechanisms. Practical validation in flexible transparent heaters demonstrates rapid thermal response and >20 h continuous operational stability. This study provides a scalable design strategy for high-performance PET-supported Cu meshes, offering insights for interface and structural optimization of flexible metallic TCEs for next-generation optoelectronics.

Schlagwörter

Stichwörter der Autor:innen

aperiodic mesh geometrydamp-heat resistanceflexible transparent conductive electrodesinterfacial adhesioninterfacial layer engineeringmaskless laser lithography

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China.
  • Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
  • Ningbo Wakan Electronic Science Technology Co., Ltd., Ningbo 315475, China.

ORCID-Profile: Hongliang Zhang, Weijie Song

Förderung

  • the "Pioneer" and "Leading Goose" R&D Program of Zhejiang
  • “Pioneer” and “Leading Goose” R&D Program of Zhejiang

Zitieren

APA

Lu, X., Li, J., Bao, B., Zhang, C., Wang, Q., Xu, G., Rao, X., Zhang, H., & Song, W. (2026). Optimized Interfacial Layers for High-Adhesion and Damp-Heat-Resistant Cu Meshes with Aperiodic Geometries on PET Substrates. Materials, 19(12), 2608. https://doi.org/10.3390/ma19122608

Vancouver

Lu X, Li J, Bao B, Zhang C, Wang Q, Xu G, et al. Optimized Interfacial Layers for High-Adhesion and Damp-Heat-Resistant Cu Meshes with Aperiodic Geometries on PET Substrates. Materials. 2026;19(12):2608. doi:10.3390/ma19122608

BibTeX
@article{Lu2026,
  author = {Lu, Xiao and Li, Jia and Bao, Biyou and Zhang, Chengli and Wang, Qiang and Xu, Guanglong and Rao, Xianfa and Zhang, Hongliang and Song, Weijie},
  title = {Optimized Interfacial Layers for High-Adhesion and Damp-Heat-Resistant Cu Meshes with Aperiodic Geometries on PET Substrates},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2608},
  doi = {10.3390/ma19122608}
}
Kostenlos starten →