EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Accuracy Analysis of Holes Drilled in Ductile Cast Iron with an HSS Helical Drill Bit

Radosław Sójka, Piotr Ziarkowski iD, Kamil Klamczyński iD, Natalia Kowalska iD, Slawomir Blasiak iD, Lukasz Nowakowski, Michal Skrzyniarz iD

Materials · 17.06.2026 · 19 (12) · 2606

DOI: 10.3390/ma19122606 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 17.06.2026. Verfasst von Radosław Sójka und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Manufacturing Engineering and Metrology, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kielce University of Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Controlling macro-geometrical errors in the dry drilling of ductile cast iron remains a critical challenge for sustainable and cost-efficient automotive component manufacturing. This paper investigates the influence of cutting speed (vc) and feed per revolution (fn) on the dimensional and shape accuracy of holes drilled in EN-GJS-500-7 ductile cast iron using an HSS DIN 338 helical drill (Ø 11.8 mm, Ceratizit) on an AVIA VMC800 CNC milling centre. A one-factor-at-a-time (OFAT) experimental design was applied: the feed effect was evaluated at vc = 10 m/min with fn ∈ {0.10, 0.15, 0.20} mm/rev, while the speed effect was evaluated at fn = 0.20 mm/rev with vc ∈ {10, 25, 30} m/min. Cutting forces, torques, and vibration accelerations were recorded using an HBM MSC 10 transducer and a PCB 356A01 tri-axial accelerometer. Hole geometry was assessed on a Zeiss Contura G2 coordinate-measuring machine (CMM), and surface texture was evaluated with a TOPO 01P contact profilometer. The expanded measurement uncertainty (k = 2) was estimated based on duplicate test specimens. All drilled holes fell within the IT12 dimensional tolerance (PN-EN 22768-1:1999 grade c), with diameter oversizes ranging from +0.26 mm to +0.46 mm relative to the nominal bore. Cutting speed was identified as the dominant factor affecting both diameter oversize and cylindricity, which increased by 60% (from 0.10 to 0.16 mm) as vc rose from 10 to 30 m/min. Vibration accelerations increased nonlinearly between vc = 25 and 30 m/min (by a factor of 2.5×), indicating an approach to a structural resonance condition. The lowest surface roughness (Ra = 6.6 µm) was obtained at vc = 25 m/min. These findings establish clear physical baselines for tool deflection limits, demonstrating that managing dynamic process stability is vital for optimising macro-geometrical accuracy in the dry machining of cast iron alloys.

Schlagwörter

Stichwörter der Autor:innen

HSS twist drillcylindricity errordry machiningductile cast ironprocess dynamicsroundness deviation

Autor:innen und Institutionen

  • Department of Manufacturing Engineering and Metrology, Kielce University of Technology, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland.

ORCID-Profile: Piotr Ziarkowski, Kamil Klamczyński, Natalia Kowalska, Slawomir Blasiak, Michal Skrzyniarz

Förderung

  • Kielce University of Technology

Zitieren

APA

Sójka, R., Ziarkowski, P., Klamczyński, K., Kowalska, N., Blasiak, S., Nowakowski, L., & Skrzyniarz, M. (2026). Accuracy Analysis of Holes Drilled in Ductile Cast Iron with an HSS Helical Drill Bit. Materials, 19(12), 2606. https://doi.org/10.3390/ma19122606

Vancouver

Sójka R, Ziarkowski P, Klamczyński K, Kowalska N, Blasiak S, Nowakowski L, et al. Accuracy Analysis of Holes Drilled in Ductile Cast Iron with an HSS Helical Drill Bit. Materials. 2026;19(12):2606. doi:10.3390/ma19122606

BibTeX
@article{Sjka2026,
  author = {Sójka, Radosław and Ziarkowski, Piotr and Klamczyński, Kamil and Kowalska, Natalia and Blasiak, Slawomir and Nowakowski, Lukasz and Skrzyniarz, Michal},
  title = {Accuracy Analysis of Holes Drilled in Ductile Cast Iron with an HSS Helical Drill Bit},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2606},
  doi = {10.3390/ma19122606}
}
Kostenlos starten →