EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Theoretical and Experimental Investigations of High-Entropy (TiVNbTa)2AlC MAX Phase

Lexing Che, Mingdong Bao, Zhihua Sun, Yingwen Cao

Materials · 16.06.2026 · 19 (12) · 2593

DOI: 10.3390/ma19122593 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.06.2026. Verfasst von Lexing Che und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials and Chemical Engineering, Ningbo University of Technology, Ningbo 315211, China. Die Arbeit nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ningbo University of Technology, Ningbo Science and Technology Bureau.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-entropy MAX phases (TiVNbTa)2AlC have attracted increasing attention due to their potential advantages in structural stability, damage tolerance, and mechanical reliability under complex service environments. This work studied the crystal and electrical structures with the elastic properties, the synthesis reactions and further wear resistance of HE-MAX (TiVNbTa)2AlC theoretically and experimentally. The charge transfer between both M-C atoms and M-Al atoms turned more intense, which correspondingly strengthened the M-C and M-Al bonds, respectively. Because of the dope on M-sites, (TiVNbTa)2AlC exhibited larger fracture toughness KIC and a lower brittle index M, which suggested lower brittleness, better crack extension resistance, and higher damage tolerance than Ti2AlC. In this work, high-entropy (TiVNbTa)2AlC MAX phase ceramics were successfully synthesized by a powder metallurgy route combined with pressureless sintering and spark plasma sintering (SPS). The effects of raw material composition and sintering temperature on phase evolution, microstructure formation, mechanical properties, and tribological behavior were systematically investigated. The results show that a highly pure (TiVNbTa)2AlC phase with a phase fraction of 96.8% could be obtained at a molar ratio of M:Al:C = 2:1.2:0.8 and a sintering temperature of 1550 °C. Phase evolution analysis indicated that the reaction process followed the sequence of intermetallic compound (IMC) formation → carbide formation → MAX phase formation. Severe lattice distortion induced by the multi-principal-element solid solution significantly enhanced the hardness of the material, which was markedly higher than that of conventional ternary MAX phases. Owing to its higher hardness and more homogeneous solid-solution structure, HE-MAX (TiVNbTa)2AlC could inhibit the formation of surface microcracks and reduce the driving force for crack propagation to some extent. Therefore, the lower wear rate not only reflected improved tribological performance but also demonstrated the beneficial role of high-entropy design in enhancing resistance to surface damage.

Schlagwörter

Stichwörter der Autor:innen

MAX phases ceramicselectronic structurefirst-principles calculationhigh-entropytribological behavior

Autor:innen und Institutionen

  • School of Materials and Chemical Engineering, Ningbo University of Technology, Ningbo 315211, China.
  • School of Materials Science and Engineering, Chang'an University, Xi'an 710061, China.

Förderung

  • Ningbo University of Technology
  • Ningbo Science and Technology Bureau

Zitieren

APA

Che, L., Bao, M., Sun, Z., & Cao, Y. (2026). Theoretical and Experimental Investigations of High-Entropy (TiVNbTa)2AlC MAX Phase. Materials, 19(12), 2593. https://doi.org/10.3390/ma19122593

Vancouver

Che L, Bao M, Sun Z, Cao Y. Theoretical and Experimental Investigations of High-Entropy (TiVNbTa)2AlC MAX Phase. Materials. 2026;19(12):2593. doi:10.3390/ma19122593

BibTeX
@article{Che2026,
  author = {Che, Lexing and Bao, Mingdong and Sun, Zhihua and Cao, Yingwen},
  title = {Theoretical and Experimental Investigations of High-Entropy (TiVNbTa)2AlC MAX Phase},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2593},
  doi = {10.3390/ma19122593}
}
Kostenlos starten →