Enhanced Corrosion Resistance of Waterborne Epoxy Coatings by High-Entropy Layered Double Hydroxides/Graphitic Carbon Nitride Fillers
Materials · 15.06.2026 · 19 (12) · 2576
DOI: 10.3390/ma19122576 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.06.2026. Verfasst von Shaolei Song und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Xuzhou University of Technology, Xuzhou 221018, China. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xuzhou Science and Technology Bureau, Jiangsu Province Science and Technology Department, State Administration for Market Regulation.
Abstract (Originalsprache)
Two-dimensional nanomaterials exhibit excellent physical barrier properties, which can effectively enhance the corrosion resistance of waterborne epoxy coatings. Herein, we report a facile strategy for preparing a multi-component synergistic anti-corrosion coating, where two-dimensional graphitic carbon nitride (g-C3N4) and high-entropy layered double hydroxides (HE-LDHs) are integrated into a waterborne epoxy matrix via magnetic-ultrasonic synergistic dispersion. The resulting HE-LDHs/g-C3N4-epoxy coating exhibits exceptional corrosion resistance for Q235 steel. Electrochemical impedance spectroscopy (EIS) and polarization curves showed that when the mass ratio of g-C3N4 to HE-LDHs was 1:1, the resulting coating (PCN-LDH-1.0) maintained a coating resistance of 5.48 × 105 Ω·m2 after 28 days of immersion in 3.5% NaCl solution, which was five orders of magnitude higher than that of pure waterborne epoxy coating. Meanwhile, the corrosion current density was reduced by four orders of magnitude, from 5.83 × 10−1 A·m−2 to 1.68 × 10−5 A·m−2. After 30 days of salt spray testing, no rust, blistering or adhesion loss was observed on the coating surface. These enhanced performances by addition of g-C3N4 and HE-LDHs were attributed to the combined effects of the tortuous diffusion pathways. Additionally, the PCN-LDH-1.0 coating retained excellent mechanical properties, including a pencil hardness of 3H and the highest adhesion grade. This study provides a facile method for preparing high-performance waterborne anti-corrosion coatings.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil Engineering, Xuzhou University of Technology, Xuzhou 221018, China.
- Analysis and Testing Center, Xuzhou University of Technology, Xuzhou 221018, China.
- School of Materials and Chemical Engineering, Xuzhou University of Technology, Xuzhou 221018, China.
ORCID-Profile: Shaolei Song, Dongjiang Pan
Förderung
- Xuzhou Science and Technology Bureau
- Jiangsu Province Science and Technology Department
- State Administration for Market Regulation
- Jiangsu Provincial Department of Housing and Urban-Rural Development
- Jiangsu Education Department
- Xuzhou Science and Technology Plan Project
- Natural Science Foundation of Jiangsu Province
- Science and Technology Project of the State Administration for Market Regulation
Zitieren
APA
Song, S., Chen, X., Jiang, P., Liang, W., Liu, Y., Pan, D., Guo, Q., Lei, L., & Li, Y. (2026). Enhanced Corrosion Resistance of Waterborne Epoxy Coatings by High-Entropy Layered Double Hydroxides/Graphitic Carbon Nitride Fillers. Materials, 19(12), 2576. https://doi.org/10.3390/ma19122576
Vancouver
Song S, Chen X, Jiang P, Liang W, Liu Y, Pan D, et al. Enhanced Corrosion Resistance of Waterborne Epoxy Coatings by High-Entropy Layered Double Hydroxides/Graphitic Carbon Nitride Fillers. Materials. 2026;19(12):2576. doi:10.3390/ma19122576
BibTeX
@article{Song2026,
author = {Song, Shaolei and Chen, Xin and Jiang, Peiqi and Liang, Wenchang and Liu, Yuanyuan and Pan, Dongjiang and Guo, Qing and Lei, Lei and Li, Yan},
title = {Enhanced Corrosion Resistance of Waterborne Epoxy Coatings by High-Entropy Layered Double Hydroxides/Graphitic Carbon Nitride Fillers},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2576},
doi = {10.3390/ma19122576}
}
EUVIMED