EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Freeze–Thaw Durability and Anisotropic Damage Evolution of 3D-Printed River-Sediment Engineered Cementitious Composites: Effects of Interlayer Interface Defects

Lu Yin, Minjie Lv iD, Nan Ma, Fang Yuan, Jiajia Zhou, Chengfang Yuan

Materials · 12.06.2026 · 19 (12) · 2559

DOI: 10.3390/ma19122559 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.06.2026. Verfasst von Lu Yin und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Henan Province, Zhengzhou University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Freeze–thaw durability of 3D-printed engineered cementitious composites (3DP-ECC) is strongly affected by print-induced interlayer defects and anisotropy, particularly in cold regions. This study investigated Cast-ECC and Z-direction 3DP-ECC incorporating Yellow River sediment (YRS) as an equal-mass replacement for quartz sand at 0–100%. Compressive, three-point bending, and four-point bending tests, relative dynamic elastic modulus (RDME), XCT, MIP, SEM–EDS, and Weibull damage modeling were used to evaluate degradation up to 150 freshwater freeze–thaw cycles. Moderate YRS replacement (25–50%) improved particle packing, reduced visible defects, and refined the pore structure, thereby enhancing frost resistance. The R50 mixture showed the best residual performance: after 150 cycles, compressive strength decreased from 55 to 46 MPa in Cast-ECC and from 54 to 44 MPa in 3DP-ECC, corresponding to retention rates of 83.6% and 81.5%, respectively. The residual peak load in four-point bending of 3DP-ECC-R50 was 15.4% lower than that of Cast-ECC-R50, confirming the detrimental role of interlayer defects under loading perpendicular to the layers. RDME-based Weibull fitting described the overall damage evolution (R2 = 0.876–0.994), while XCT, MIP, and SEM–EDS indicated that interlayer discontinuities, pore-structure evolution, and local microstructural degradation governed anisotropic deterioration. The results support durability-oriented design of YRS-based 3DP-ECC in cold regions.

Schlagwörter

Stichwörter der Autor:innen

3D-printed engineered cementitious compositesWeibull damage modelYellow River sedimentanisotropic damage evolutionfreeze–thaw durabilityinterlayer interface defectsrelative dynamic elastic modulus

Autor:innen und Institutionen

  • School of Civil Engineering, Zhengzhou University, Zhengzhou 450001, China.
  • Henan Investment Group Co., Ltd., Zhengzhou 450003, China.
  • College of Civil and Transportation Engineering, Shenzhen University, Shenzhen 518060, China.

ORCID-Profile: Minjie Lv

Förderung

  • Natural Science Foundation of Henan Province
  • Zhengzhou University

Zitieren

APA

Yin, L., Lv, M., Ma, N., Yuan, F., Zhou, J., & Yuan, C. (2026). Freeze–Thaw Durability and Anisotropic Damage Evolution of 3D-Printed River-Sediment Engineered Cementitious Composites: Effects of Interlayer Interface Defects. Materials, 19(12), 2559. https://doi.org/10.3390/ma19122559

Vancouver

Yin L, Lv M, Ma N, Yuan F, Zhou J, Yuan C. Freeze–Thaw Durability and Anisotropic Damage Evolution of 3D-Printed River-Sediment Engineered Cementitious Composites: Effects of Interlayer Interface Defects. Materials. 2026;19(12):2559. doi:10.3390/ma19122559

BibTeX
@article{Yin2026,
  author = {Yin, Lu and Lv, Minjie and Ma, Nan and Yuan, Fang and Zhou, Jiajia and Yuan, Chengfang},
  title = {Freeze–Thaw Durability and Anisotropic Damage Evolution of 3D-Printed River-Sediment Engineered Cementitious Composites: Effects of Interlayer Interface Defects},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2559},
  doi = {10.3390/ma19122559}
}
Kostenlos starten →