Microstructure and Mechanical Properties of a Ti-Al-Mo-V-Cr-Sn-Zr Titanium Alloy via Double-Annealing Heat Treatment
Materials · 12.06.2026 · 19 (12) · 2553
DOI: 10.3390/ma19122553 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 12.06.2026. Verfasst von Jinfeng Shu und 11 weiteren Autor:innen. Beteiligte Einrichtung: Northwest Institute for Non-Ferrous Metal Research, Xi'an 710016, China. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D Program of Shannxi Province, Key R&D Program of Shannxi Province.
Abstract (Originalsprache)
Achieving a favorable synergy of strength, ductility, and toughness is a critical challenge for expanding the engineering applications of titanium alloys. In this work, a medium-strength and high-toughness novel Ti-Al-Mo-V-Cr-Sn-Zr (named Ti62F) titanium alloy in the form of a Φ400 mm bar was adopted to systematically investigate the regulation behavior of double annealing on its microstructure and mechanical properties, and quantitative correlations between microstructural parameters and macroscopic properties were established. Increasing the cooling rate during the first annealing stage (air cooling, force air cooling and water quenching) significantly refined the secondary α (αs) phase and reduced the volume fraction and size of the primary α (αp) phase, leading to an increase in the ultimate tensile strength of the alloy from 1077 MPa to 1229 MPa. However, the impact-absorbed energy decreased from 51.5 J to 23.3 J. When the second annealing temperature was varied within the range of 625–675 °C, the ultimate tensile strength fluctuated slightly and the impact toughness increased moderately. Equiaxed αp phase and relatively thick αs can induce multiple crack deflections, prolong the crack propagation path and enhance energy absorption. Dislocations are mainly piled up at α/β phase boundaries, triggering void nucleation and growth, which dominate the ductility and toughness levels. Tensile twinning acts only as an auxiliary deformation mechanism and contributes limitedly to toughness. After heat treatment under the optimized schedule of 880 °C/2 h/AC + 650 °C/4 h/AC, the Ti62F alloy exhibits a superior strength–toughness balance compared with conventional medium-strength titanium alloys such as TA15, TC4, and TC4-DT. The findings can provide a heat treatment basis for microstructural regulation of large-size Ti62F bars and their engineering applications in aerospace structural components.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Northwest Institute for Non-Ferrous Metal Research, Xi'an 710016, China.
- Western Superconducting Materials Technology Co., Ltd., Xi'an 710018, China.
- Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
Förderung
- Key R&D Program of Shannxi Province
- Key R&D Program of Shannxi Province
Zitieren
APA
Shu, J., Qu, B., Ma, Y., Li, K., Hao, F., Zhao, N., Ju, B., Ren, Y., Yang, J., Wang, T., Lei, J., & Liu, X. (2026). Microstructure and Mechanical Properties of a Ti-Al-Mo-V-Cr-Sn-Zr Titanium Alloy via Double-Annealing Heat Treatment. Materials, 19(12), 2553. https://doi.org/10.3390/ma19122553
Vancouver
Shu J, Qu B, Ma Y, Li K, Hao F, Zhao N, et al. Microstructure and Mechanical Properties of a Ti-Al-Mo-V-Cr-Sn-Zr Titanium Alloy via Double-Annealing Heat Treatment. Materials. 2026;19(12):2553. doi:10.3390/ma19122553
BibTeX
@article{Shu2026,
author = {Shu, Jinfeng and Qu, Bao and Ma, Yingjie and Li, Kang and Hao, Fang and Zhao, Ning and Ju, Biao and Ren, Yong and Yang, Jing and Wang, Tao and Lei, Jinwen and Liu, Xianghong},
title = {Microstructure and Mechanical Properties of a Ti-Al-Mo-V-Cr-Sn-Zr Titanium Alloy via Double-Annealing Heat Treatment},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2553},
doi = {10.3390/ma19122553}
}
EUVIMED