EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Rapid Formation and Interfacial Adhesion Enhancement in Zirconium Conversion Coatings on 55AlZnMg-Coated Steel Under a Short H2ZrF6 Pretreatment

Xiaonan Zhang, Weixi Zhao, Lin Lu

Materials · 12.06.2026 · 19 (12) · 2545

DOI: 10.3390/ma19122545 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.06.2026. Verfasst von Xiaonan Zhang und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the uneven deposition of zirconium conversion coatings on multiphase 55AlZnMg under short pretreatment cycles, this study investigated the time-dependent formation behavior of ZrCC in a selected H2ZrF6 bath. By precisely controlling the immersion time (20–90 s) and utilizing SEM-EDS and AFM characterization techniques, this study systematically revealed the growth kinetics and film-forming mechanisms of ZrCC on complex alloy surfaces. The results indicate that the Zn-rich phase on the surface of the 55AlZnMg coating, due to its relatively positive potential, preferentially induces the deposition of the film-forming material. Subsequently, dealloying occurs in the Al-rich phase and the Mg/Zn enriched regions, forming Zn-enriched regions that promote the continuous deposition of the film-forming material, ultimately achieving complete surface coverage; the film morphology evolves from an initial needle-like structure to a network structure, eventually forming a nanosheet structure. The film-forming process of ZrCC on the 55AlZnMg substrate surface is primarily driven by selective growth, with electrochemical properties of the alloy phases, significantly enhancing adhesion between the aluminum-zinc-magnesium coating and the overcoat and providing practical guidance for improving surface uniformity and interfacial adhesion of Al-Zn-Mg-coated steel.

Schlagwörter

Stichwörter der Autor:innen

55AlZnMg coatingZirconateZrCCconversion filmdealloying

Autor:innen und Institutionen

  • Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China.

Zitieren

APA

Zhang, X., Zhao, W., & Lu, L. (2026). Rapid Formation and Interfacial Adhesion Enhancement in Zirconium Conversion Coatings on 55AlZnMg-Coated Steel Under a Short H2ZrF6 Pretreatment. Materials, 19(12), 2545. https://doi.org/10.3390/ma19122545

Vancouver

Zhang X, Zhao W, Lu L. Rapid Formation and Interfacial Adhesion Enhancement in Zirconium Conversion Coatings on 55AlZnMg-Coated Steel Under a Short H2ZrF6 Pretreatment. Materials. 2026;19(12):2545. doi:10.3390/ma19122545

BibTeX
@article{Zhang2026,
  author = {Zhang, Xiaonan and Zhao, Weixi and Lu, Lin},
  title = {Rapid Formation and Interfacial Adhesion Enhancement in Zirconium Conversion Coatings on 55AlZnMg-Coated Steel Under a Short H2ZrF6 Pretreatment},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2545},
  doi = {10.3390/ma19122545}
}
Kostenlos starten →