Performance-Based Assessment of Pakistani Regional Aggregates for Flexible Pavements Using Macro- and Micro-Characterization
Materials · 11.06.2026 · 19 (12) · 2535
DOI: 10.3390/ma19122535 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.06.2026. Verfasst von Fazli Karim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Sarhad University of Science & Information Technology, Peshawar 25200, Pakistan. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Imam Mohammad ibn Saud Islamic University.
Abstract (Originalsprache)
Aggregates comprise up to 95% of flexible pavement composition, critically influencing performance based on geological source and processing methods. In Pakistan, where approximately 264,175 km of roads carry 96% of inland freight, premium Margalla aggregates face increasing demand and depleting reserves, necessitating sustainable alternatives. This study comprehensively evaluates aggregates from five key quarries (Margalla, Malakand, Kohat, Swabi, and Besai) for highway suitability. Rigorous laboratory testing encompassed macro-level physical and mechanical properties and micro-characterization using Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and Fourier Transform Infrared Spectroscopy (FTIR), alongside performance tests including Indirect Tensile Strength (ITS), rutting resistance, and fatigue analysis. Overall, Margalla aggregates exhibited the best performance, showing the lowest abrasion value (21%), highest Tensile Strength ratio (TSR) (82%), highest conditioned ITS (433.7 kPa), highest dynamic modulus (2120 MPa at 25 Hz), and the lowest rut depth (7.8 mm at 10,000 cycles). These superior properties are attributed to their favorable physical characteristics and high calcium content. Malakand and Kohat aggregates also demonstrated satisfactory performance, with TSR values of 79% and 76%, conditioned ITS values of 408.7 and 377.7 kPa, and rut depths of approximately 8.8 and 10.5 mm, respectively, indicating their suitability for medium-traffic pavements. In contrast, Swabi and Besai aggregates exhibited lower moisture resistance (TSR = 77% and 75%), lower conditioned ITS (355.7 and 337.7 kPa), and higher rut depths (~13.0 and 14.2 mm), making them less suitable for high-stress pavement layers. These findings support Malakand and Kohat aggregates as viable regional alternatives to Margalla.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Civil Engineering, Sarhad University of Science & Information Technology, Peshawar 25200, Pakistan.
- Department of Civil & Environmental Engineering, Universiti Teknologi PETRONAS (UTP), Seri Iskandar 32610, Malaysia.
- Department of Civil and Environmental Engineering, College of Engineering, King Faisal University, Al Ahsa 36362, Saudi Arabia.
- Department of Civil Engineering, College of Engineering, Imam Mohammad Ibn Saud Islamic University (IMSIU), Riyadh 11564, Saudi Arabia.
ORCID-Profile: Fazli Karim, Md Arifuzzaman, Muhammad Imran Khan
Förderung
- Imam Mohammad ibn Saud Islamic University
Zitieren
APA
Karim, F., Khan, N., Arifuzzaman, M., & Khan, M. I. (2026). Performance-Based Assessment of Pakistani Regional Aggregates for Flexible Pavements Using Macro- and Micro-Characterization. Materials, 19(12), 2535. https://doi.org/10.3390/ma19122535
Vancouver
Karim F, Khan N, Arifuzzaman M, Khan MI. Performance-Based Assessment of Pakistani Regional Aggregates for Flexible Pavements Using Macro- and Micro-Characterization. Materials. 2026;19(12):2535. doi:10.3390/ma19122535
BibTeX
@article{Karim2026,
author = {Karim, Fazli and Khan, Nasir and Arifuzzaman, Md and Khan, Muhammad Imran},
title = {Performance-Based Assessment of Pakistani Regional Aggregates for Flexible Pavements Using Macro- and Micro-Characterization},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2535},
doi = {10.3390/ma19122535}
}
EUVIMED