Bioactive Coatings on Ti–Zr–Nb Alloy: Synthesis, Characterization and Implantology Potential
Materials · 11.06.2026 · 19 (12) · 2534
DOI: 10.3390/ma19122534 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 11.06.2026. Verfasst von Kseniia Kovalenko und 9 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Manufacturing Technologies with the Seat in Presov, Technical University of Kosice, Bayerova 1, 08001 Presov, Slovakia. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, Science, Research and Sport of the Slovak Republic, National Research Foundation of Ukraine, Ministry of Education and Science.
Abstract (Originalsprache)
This research reports on the properties of oxide-ceramic coatings produced by plasma electrolytic oxidation in novel electrolyte solutions for implantology applications. A series of bioactive calcium-phosphate coatings was synthesized on medical-grade Ti-13Zr-13Nb alloy using the plasma electrolytic oxidation (PEO) method. Novel electrolytes enriched with calcium and phosphorus were developed, enabling the formation of coatings with tailored physicochemical and structural characteristics. A correlation was established between the electrolyte composition and the phase composition, thickness, morphology, porosity, and microhardness of the resulting coatings. The optimum coatings exhibited a Ca/P ratio close to that of natural human bone tissue, homogeneity, a well-developed porous surface topography, and controlled resorption behavior. For the first time, a mechanism of calcium-phosphate coating resorption in a biologically active environment has been proposed. It involves partial dissolution, the formation of apatite-like surface structures, and the subsequent controlled release of Ca and P ions. In vitro testing in simulated body fluid indicated the potential bioactivity of the synthesized coatings. The proposed calcium-phosphate coatings may be considered promising candidates for future implant surface modification. The results obtained are significant for the development of advanced orthopedic and dental implants, including those fabricated using additive manufacturing technologies.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Manufacturing Technologies with the Seat in Presov, Technical University of Kosice, Bayerova 1, 08001 Presov, Slovakia.
- Faculty of Food and Chemical Technologies, Ukrainian State University of Science and Technologies, 49000 Dnipro, Ukraine.
- Department of Fuel, Polymer, and Polygraphic Materials Technologies, Faculty of Nutritional and Chemical Technologies, Ukrainian State University of Science and Technologies, 49000 Dnipro, Ukraine.
- Department of Ecology, Heat Engineering, Occupational Safety and Health, Faculty of Mechanical Engineering and Environmental Protection, Ukrainian State University of Science and Technologies, 49000 Dnipro, Ukraine.
- Department of Physical Chemistry, Faculty of Nutritional and Chemical Technologies, Ukrainian State University of Science and Technologies, 49000 Dnipro, Ukraine.
- Department of Power Engineering, Faculty of Computer Science and Engineering, Ukrainian State University of Science and Technologies, 49000 Dnipro, Ukraine.
ORCID-Profile: Kseniia Kovalenko, Marcel Fedak, Oleh Kalinichenko, Oleksandr Yeromin, Olesia Shmychkova, Andrii Kulikov
Förderung
- Ministry of Education, Science, Research and Sport of the Slovak Republic
- National Research Foundation of Ukraine
- Ministry of Education and Science
- Ministry of Education, Research, Development, and Youth of the Slovak Republic
- Ministry of Education and Science of Ukraine
Zitieren
APA
Kovalenko, K., Sukhyi, K., Fedak, M., Rimar, M., Kalinichenko, O., Yeromin, O., Shmychkova, O., Kulikov, A., Kovalyov, S., & Sukhyi, M. (2026). Bioactive Coatings on Ti–Zr–Nb Alloy: Synthesis, Characterization and Implantology Potential. Materials, 19(12), 2534. https://doi.org/10.3390/ma19122534
Vancouver
Kovalenko K, Sukhyi K, Fedak M, Rimar M, Kalinichenko O, Yeromin O, et al. Bioactive Coatings on Ti–Zr–Nb Alloy: Synthesis, Characterization and Implantology Potential. Materials. 2026;19(12):2534. doi:10.3390/ma19122534
BibTeX
@article{Kovalenko2026,
author = {Kovalenko, Kseniia and Sukhyi, Kostiantyn and Fedak, Marcel and Rimar, Miroslav and Kalinichenko, Oleh and Yeromin, Oleksandr and Shmychkova, Olesia and Kulikov, Andrii and Kovalyov, Stanislav and Sukhyi, Mykhailo},
title = {Bioactive Coatings on Ti–Zr–Nb Alloy: Synthesis, Characterization and Implantology Potential},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2534},
doi = {10.3390/ma19122534}
}
EUVIMED