A Hybrid Machine Learning Approach to Energy Consumption and Road Emissions Modeling of CNG Vehicles Based on Chassis Dynamometer Data and Road Load Power
Materials · 10.06.2026 · 19 (12) · 2503
DOI: 10.3390/ma19122503 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.06.2026. Verfasst von Artur Jaworski und 4 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 12 Powstancow Warszawy Ave., 35-029 Rzeszow, Poland. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents a comparative analysis of energy consumption and gaseous emissions from a compressed natural gas (CNG)-fueled vehicle under real driving emissions (RDE) conditions and values predicted using machine learning (ML) models developed from chassis dynamometer data. The analyzed components included energy consumption (EC) as well as carbon dioxide (CO2), carbon monoxide (CO), total hydrocarbons (HC), methane (CH4), and nitrogen oxides (NOX). The models were trained using a limited set of easily accessible predictors, namely vehicle speed and acceleration. A hybrid modelling approach was proposed, combining laboratory data with validation under real-world conditions. Additionally, road load power (Prl) was introduced as a novel predictor representing vehicle operating load. The results demonstrate that the models effectively capture emission trends, with the highest agreement obtained for CO, CO2. The inclusion of Prl improved prediction accuracy, which increased from approximately 64% to 71% for CO and from 57% to 61% for HC. For CO2, the model achieved about 80–82% agreement with RDE measurements, with analogous levels obtained for EC. A key advantage of the proposed methodology is its reliance on a limited number of input variables, which enhances practical applicability while maintaining satisfactory accuracy. Furthermore, the use of precise laboratory data improves model robustness, and the approach enables the estimation of methane (CH4), which is typically not measured by standard portable emissions measurement systems (PEMSs). The results confirm the effectiveness of the hybrid ML framework and highlight the importance of incorporating load-related parameters in real-world emissions and energy consumption modeling.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 12 Powstancow Warszawy Ave., 35-029 Rzeszow, Poland.
- Faculty of Civil and Environmental Engineering and Architecture, Rzeszow University of Technology, 12 Powstancow Warszawy Ave., 35-029 Rzeszow, Poland.
- Faculty of Mechanical Engineering, Bialystok University of Technology, 45C Wiejska Str., 15-351 Bialystok, Poland.
ORCID-Profile: Artur Jaworski, Krzysztof Balawender, Hubert Kuszewski, Bożena Babiarz, Dariusz Szpica
Zitieren
APA
Jaworski, A., Balawender, K., Kuszewski, H., Babiarz, B., & Szpica, D. (2026). A Hybrid Machine Learning Approach to Energy Consumption and Road Emissions Modeling of CNG Vehicles Based on Chassis Dynamometer Data and Road Load Power. Materials, 19(12), 2503. https://doi.org/10.3390/ma19122503
Vancouver
Jaworski A, Balawender K, Kuszewski H, Babiarz B, Szpica D. A Hybrid Machine Learning Approach to Energy Consumption and Road Emissions Modeling of CNG Vehicles Based on Chassis Dynamometer Data and Road Load Power. Materials. 2026;19(12):2503. doi:10.3390/ma19122503
BibTeX
@article{Jaworski2026,
author = {Jaworski, Artur and Balawender, Krzysztof and Kuszewski, Hubert and Babiarz, Bożena and Szpica, Dariusz},
title = {A Hybrid Machine Learning Approach to Energy Consumption and Road Emissions Modeling of CNG Vehicles Based on Chassis Dynamometer Data and Road Load Power},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2503},
doi = {10.3390/ma19122503}
}
EUVIMED