Physicochemical and Thermo–Mechanical Characterization of Sheep Wool/Phenolic Novolac Panels for Sustainable Thermal Insulation
Materials · 10.06.2026 · 19 (12) · 2488
DOI: 10.3390/ma19122488 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 10.06.2026. Verfasst von Jakub Barwinek und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-05…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Centre for Research and Development.
Abstract (Originalsprache)
This study reports the physicochemical characterization and structure–property relationships of rigid sheep wool/phenolic novolac panels developed as bio-based thermal insulation for building envelopes. Mixed Polish sheep wool was washed, mechanically opened, and formed into nonwoven mats, then impregnated with either neat or flame-retardant novolac resin to obtain lightweight boards with a fiber content of about 50 wt%. Elemental analysis, ICP-OES, FTIR spectroscopy, and laser and electron microscopy were used to evaluate the fiber composition, keratin structure, morphology, and fiber–matrix interfaces. Mechanical performance under three-point bending and shear, differential scanning calorimetry, thermogravimetric analysis, and transient hot-probe thermal-conductivity measurements were applied to link microstructure with functional behavior. Novolac impregnation transformed the compliant wool mat into self-supporting panels, increasing the flexural modulus to the 0.8–1.4 GPa range and flexural strength to approximately 48–52 MPa, while the shear modulus and work to failure rose by more than an order of magnitude relative to the loose wool reference. Thermal conductivity remained in a typical range for natural-fiber insulations (λ = 0.061 W·m−1·K−1 for the wool mat and 0.071–0.074 W·m−1·K−1 for the composites), although higher than that of expanded polystyrene. DSC and TGA confirmed that wool fibers remain thermally stable up to about 200–220 °C, that the novolac resin cures around 140 °C, with typical phenolic reaction enthalpies, and that both formulations generate high char residues of roughly 60–80 wt% at 600 °C under nitrogen, evidencing a strong charring propensity rather than directly quantifying fire resistance. Overall, the results position sheep wool/novolac panels between conventional bio-based insulation and structural composites and highlight their potential as sustainable, circular insulation materials for energy-efficient building envelopes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Glass Technology and Amorphous Coatings, Faculty of Materials Science and Ceramics, AGH University of Krakow, Al. Mickiewicza 30, 30-059 Krakow, Poland.
- Department of Animal Biotechnology, Faculty of Animal Science, University of Agriculture in Krakow, Al. Mickiewicza 24/28, 31-059 Krakow, Poland.
- Łukasiewicz Research Network-Institute of Ceramics and Building Materials, 31-983 Krakow, Poland.
ORCID-Profile: Jakub Barwinek, Piotr Szatkowski, Wiktoria Borowicz, Edyta Molik
Förderung
- National Centre for Research and Development
Zitieren
APA
Barwinek, J., Szatkowski, P., Szczecina, J., Borowicz, W., Czulak, A., & Molik, E. (2026). Physicochemical and Thermo–Mechanical Characterization of Sheep Wool/Phenolic Novolac Panels for Sustainable Thermal Insulation. Materials, 19(12), 2488. https://doi.org/10.3390/ma19122488
Vancouver
Barwinek J, Szatkowski P, Szczecina J, Borowicz W, Czulak A, Molik E. Physicochemical and Thermo–Mechanical Characterization of Sheep Wool/Phenolic Novolac Panels for Sustainable Thermal Insulation. Materials. 2026;19(12):2488. doi:10.3390/ma19122488
BibTeX
@article{Barwinek2026,
author = {Barwinek, Jakub and Szatkowski, Piotr and Szczecina, Julita and Borowicz, Wiktoria and Czulak, Andrzej and Molik, Edyta},
title = {Physicochemical and Thermo–Mechanical Characterization of Sheep Wool/Phenolic Novolac Panels for Sustainable Thermal Insulation},
journal = {Materials},
year = {2026},
volume = {19},
number = {12},
pages = {2488},
doi = {10.3390/ma19122488}
}
EUVIMED