EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Validation of a Semi-Analytical Predictive Model for Furniture Cabinet Performance from Corner Joints with Auxetic Fasteners

Ersan Güray, Ali Kasal iD, Engin Ergin, Mehmet Yüksel, Harun Diler iD, Tolga Kuşkun iD

Materials · 08.06.2026 · 19 (12) · 2448

DOI: 10.3390/ma19122448 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 08.06.2026. Verfasst von Ersan Güray und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Faculty of Engineering, Muğla Sıtkı Koçman University, 48000 Muğla, Türkiye. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Scientific and Technological Research Council of Türkiye, The Scientific and Technological Research Council of Türkiye (TÜBİTAK) under the 1002—B Emergency Support Module.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents findings of an experimental and analytical approach investigating the relationship between the performance of individual corner joints and overall performance of furniture cabinets constructed with auxetic fasteners. The moment capacities and stiffness of cabinets assembled with different auxetic fasteners were also compared. For this purpose, 12 different auxetic fasteners were produced using three-dimensional printing technology. Cabinet bodies were constructed out of 18 mm particleboard (PB), while fasteners were produced using polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), and acrylonitrile styrene acrylate (ASA) filaments. Cabinets were subjected to diagonal static loading to determine their moment capacity and stiffness. In total, 60 full-scale cabinets were prepared and tested using 12 different fasteners (3 filaments, 2 fastener lengths, and 2 fastener types), with 5 replications for each configuration. The results indicate that filament, and particularly fastener type, had a significant effect on moment capacity and stiffness, whereas fastener length was not statistically significant. Among the tested filaments, PLA exhibited the best performance. Cabinets assembled with H-type fasteners showed higher moment capacities and stiffness compared to those with K-type fasteners. The proposed semi-analytical model developed provides reasonable estimates for predicting the overall performance of cabinets based on individual corner joint tests.

Schlagwörter

Stichwörter der Autor:innen

auxetic fastenerscorner jointsfurniture cabinetmoment capacitystiffness

Autor:innen und Institutionen

  • Department of Civil Engineering, Faculty of Engineering, Muğla Sıtkı Koçman University, 48000 Muğla, Türkiye.
  • Department of Wood Products Industrial Engineering, Faculty of Technology, Muğla Sıtkı Koçman University, 48000 Muğla, Türkiye.
  • Department of Interior and Environmental Design, Faculty of Fine Arts, Afyon Kocatepe University, 03200 Afyonkarahisar, Türkiye.

ORCID-Profile: Ali Kasal, Harun Diler, Tolga Kuşkun

Förderung

  • The Scientific and Technological Research Council of Türkiye
  • The Scientific and Technological Research Council of Türkiye (TÜBİTAK) under the 1002—B Emergency Support Module

Zitieren

APA

Güray, E., Kasal, A., Ergin, E., Yüksel, M., Diler, H., & Kuşkun, T. (2026). Development and Validation of a Semi-Analytical Predictive Model for Furniture Cabinet Performance from Corner Joints with Auxetic Fasteners. Materials, 19(12), 2448. https://doi.org/10.3390/ma19122448

Vancouver

Güray E, Kasal A, Ergin E, Yüksel M, Diler H, Kuşkun T. Development and Validation of a Semi-Analytical Predictive Model for Furniture Cabinet Performance from Corner Joints with Auxetic Fasteners. Materials. 2026;19(12):2448. doi:10.3390/ma19122448

BibTeX
@article{Gray2026,
  author = {Güray, Ersan and Kasal, Ali and Ergin, Engin and Yüksel, Mehmet and Diler, Harun and Kuşkun, Tolga},
  title = {Development and Validation of a Semi-Analytical Predictive Model for Furniture Cabinet Performance from Corner Joints with Auxetic Fasteners},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {12},
  pages = {2448},
  doi = {10.3390/ma19122448}
}
Kostenlos starten →