EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of MEMS Gas Sensors and Integration for Multiple Gas Classification for Lithium-Ion Battery Thermal Runaway Warning

Haiping Liu, Sen Zhang, Shan Xue, Delong Liu, Zeyu Sun, Lianshi Li, Qi Zhang, Mingzhi Jiao iD

Materials · 05.06.2026 · 19 (11) · 2419

DOI: 10.3390/ma19112419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.06.2026. Verfasst von Haiping Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Beijing Institute of Mechanical Equipment, Beijing 100854, China. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Emergency Management of the People's Republic of China, Ministry of Emergency Management of the People’s Republic of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Characteristic gas-based detection technology can facilitate the warning of lithium-ion battery thermal runaway with a high accuracy at an early stage. Microelectromechanical system (MEMS) metal–oxide–semiconductor (MOS) gas sensors have advantages of a low cost, a high accuracy, and low power consumption; therefore, they are ideal candidates for the lithium-ion battery thermal-runaway warning. MEMS MOS gas sensors are composed of a micro-hotplate and gas-sensitive materials. The micro-hotplate component strongly influences the device’s mechanical and thermal properties. Initially, we used COMSOL to optimize the micro-hotplate component. Then, we fabricated the device based on the optimal micro-hotplate. Next, gas-sensitive materials made of ZnO and ZnO-Au were deposited on the micro-hotplate by radio-frequency magnetic sputtering. The self-made and commercial MEMS MOS sensors were integrated to form an electronic nose. The as-made electronic nose can classify hydrogen, ethylene, acetylene, methane, carbon monoxide, and ethanol with a maximum accuracy of 99.4% using gas response data acquired over only 20 s. The reported work can provide a solution for an early and accurate lithium-ion battery thermal runaway warning.

Schlagwörter

Stichwörter der Autor:innen

MOS gas sensorZnOelectronic nosesgas classificationlithium-ion battery thermal runawaymicro-hotplate

Autor:innen und Institutionen

  • Beijing Institute of Mechanical Equipment, Beijing 100854, China.
  • CASIC Space Engineering Development Co., Ltd., Beijing 100080, China.
  • National & Local Joint Engineering Laboratory for Internet Application Technology in Mines, Xuzhou 221116, China.

ORCID-Profile: Mingzhi Jiao

Förderung

  • Ministry of Emergency Management of the People's Republic of China
  • Ministry of Emergency Management of the People’s Republic of China

Zitieren

APA

Liu, H., Zhang, S., Xue, S., Liu, D., Sun, Z., Li, L., Zhang, Q., & Jiao, M. (2026). Design of MEMS Gas Sensors and Integration for Multiple Gas Classification for Lithium-Ion Battery Thermal Runaway Warning. Materials, 19(11), 2419. https://doi.org/10.3390/ma19112419

Vancouver

Liu H, Zhang S, Xue S, Liu D, Sun Z, Li L, et al. Design of MEMS Gas Sensors and Integration for Multiple Gas Classification for Lithium-Ion Battery Thermal Runaway Warning. Materials. 2026;19(11):2419. doi:10.3390/ma19112419

BibTeX
@article{Liu2026,
  author = {Liu, Haiping and Zhang, Sen and Xue, Shan and Liu, Delong and Sun, Zeyu and Li, Lianshi and Zhang, Qi and Jiao, Mingzhi},
  title = {Design of MEMS Gas Sensors and Integration for Multiple Gas Classification for Lithium-Ion Battery Thermal Runaway Warning},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2419},
  doi = {10.3390/ma19112419}
}
Kostenlos starten →