Manganese-Functionalized Bentonite for Efficient Cadmium Ion Removal from Aqueous Systems
Materials · 05.06.2026 · 19 (11) · 2416
DOI: 10.3390/ma19112416 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.06.2026. Verfasst von Silvia Dolinská und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Geotechnics of the Slovak Academy of Sciences, 040 01 Košice, Slovakia. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Recovery and Resilience Plan, EU NextGenerationEU.
Abstract (Originalsprache)
Bentonite is widely used as a sorbent due to its high specific surface area and ion-exchange capacity; however, its properties can be significantly influenced by the presence of additional mineral phases and chemical modification. In this study, the influence of manganese oxides and quartz sand on the sorption properties of bentonite from the Stará Kremnička was systematically investigated, with particular attention to surface characterization by X-ray photoelectron spectroscopy (XPS). The materials were also characterized by X-ray diffraction, FTIR spectroscopy, and zeta potential measurements. XPS analysis revealed that manganese in all modified samples was predominantly present in the Mn(IV) oxidation state, with Mn 2p3/2 binding energies of 642.5–642.7 eV, corresponding to MnO2-type phases. Deconvolution of the O 1s spectra confirmed the presence of lattice oxygen, silicate oxygen, and surface hydroxyl groups. The reason for the modification of mainly natural materials with manganese oxides is their higher affinity for the adsorption of heavy metal cations. The maximum adsorption capacity of natural bentonite was 63.29 mg/g. In bentonite samples modified with manganese oxides, the value increased to 103.09 mg/g for BMn, and to 116.28 mg/g for the MMn mixture. The results demonstrate that sorption behavior is governed by a combination of ion exchange on bentonite and interactions with Mn oxide surface phases, providing new insight into the role of Mn(IV) species in surface-controlled metal binding processes. These findings highlight the importance of surface chemical states in designing efficient bentonite-based sorbents.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Geotechnics of the Slovak Academy of Sciences, 040 01 Košice, Slovakia.
- Institute of Geonics of the Czech Academy of Sciences, 708 00 Ostrava-Poruba, Czech Republic.
ORCID-Profile: Lenka Vaculíková, Miroslava Václavíková
Förderung
- Recovery and Resilience Plan
- EU NextGenerationEU
Zitieren
APA
Dolinská, S., Znamenáčková, I., Valovičová, V., Vaculíková, L., Hredzák, S., Václavíková, M., & Ivaničová, L. (2026). Manganese-Functionalized Bentonite for Efficient Cadmium Ion Removal from Aqueous Systems. Materials, 19(11), 2416. https://doi.org/10.3390/ma19112416
Vancouver
Dolinská S, Znamenáčková I, Valovičová V, Vaculíková L, Hredzák S, Václavíková M, et al. Manganese-Functionalized Bentonite for Efficient Cadmium Ion Removal from Aqueous Systems. Materials. 2026;19(11):2416. doi:10.3390/ma19112416
BibTeX
@article{Dolinsk2026,
author = {Dolinská, Silvia and Znamenáčková, Ingrid and Valovičová, Věra and Vaculíková, Lenka and Hredzák, Slavomír and Václavíková, Miroslava and Ivaničová, Lucia},
title = {Manganese-Functionalized Bentonite for Efficient Cadmium Ion Removal from Aqueous Systems},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2416},
doi = {10.3390/ma19112416}
}
EUVIMED