EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Systematic Evaluation of Strain Rate and Environmental Conditions Effects on Stress Corrosion Cracking of an Al-Cu Alloy

Sergio Lorenzi iD, Lorenzo Nani iD, Samuel Ferrari iD, Mattia Locatelli iD, Luca Gritti iD, Sara Bocchi iD, Marina Cabrini iD

Materials · 05.06.2026 · 19 (11) · 2414

DOI: 10.3390/ma19112414 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 05.06.2026. Verfasst von Sergio Lorenzi und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering and Applied Sciences, University of Bergamo, 24044 Dalmine, Italy. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Εuropean Union-NextGenerationEU.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study is to comprehensively investigate and quantify the effect of strain rate (SR) and environmental parameters on the stress corrosion cracking (SCC) behavior of a high-strength, aluminum–copper alloy. Slow strain rate (SSR) tests were carried out in air at 25 °C, over a SR range from 10−4 to 10−7 s−1 and controlled relative humidity (RH) between 40% and 80%. The influence of the pre-soaking period in 3.5 wt.% NaCl solution was also assessed. A major effect of pre-soaking was identified, as it was necessary for the onset of SCC. Increasing RH over 40% and decreasing SR below 10−5 s−1 significantly intensified SCC susceptibility, leading to ductility loss up to 84%. SSR test results were supported by microstructural investigations, with particular emphasis on the role of second phases. Their electrochemical activity was examined by scanning Kelvin probe force microscopy (SKPFM), while intergranular corrosion (IGC) susceptibility was evaluated according to the ISO 11846 standard. The pronounced IGC susceptibility of the alloy led to predominantly intergranular fracture morphologies in cross-section peripheral areas after SSR testing. The results confirmed the synergistic effect among microstructure, IGC susceptibility and SCC behavior, identifying a critical window of mechanical and environmental parameters governing SCC.

Schlagwörter

Stichwörter der Autor:innen

aluminum alloyscorrosionenvironmentally assisted crackingintergranular corrosionslow strain ratestress corrosion cracking

Autor:innen und Institutionen

  • Department of Engineering and Applied Sciences, University of Bergamo, 24044 Dalmine, Italy.
  • National Interuniversity Consortium of Materials Science and Technology (INSTM), 50121 Firenze, Italy.
  • Department of Management Information and Production Engineering, University of Bergamo, 24044 Dalmine, Italy.

ORCID-Profile: Sergio Lorenzi, Lorenzo Nani, Samuel Ferrari, Mattia Locatelli, Luca Gritti, Sara Bocchi, Marina Cabrini

Förderung

  • Εuropean Union-NextGenerationEU

Zitieren

APA

Lorenzi, S., Nani, L., Ferrari, S., Locatelli, M., Gritti, L., Bocchi, S., & Cabrini, M. (2026). Systematic Evaluation of Strain Rate and Environmental Conditions Effects on Stress Corrosion Cracking of an Al-Cu Alloy. Materials, 19(11), 2414. https://doi.org/10.3390/ma19112414

Vancouver

Lorenzi S, Nani L, Ferrari S, Locatelli M, Gritti L, Bocchi S, et al. Systematic Evaluation of Strain Rate and Environmental Conditions Effects on Stress Corrosion Cracking of an Al-Cu Alloy. Materials. 2026;19(11):2414. doi:10.3390/ma19112414

BibTeX
@article{Lorenzi2026,
  author = {Lorenzi, Sergio and Nani, Lorenzo and Ferrari, Samuel and Locatelli, Mattia and Gritti, Luca and Bocchi, Sara and Cabrini, Marina},
  title = {Systematic Evaluation of Strain Rate and Environmental Conditions Effects on Stress Corrosion Cracking of an Al-Cu Alloy},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2414},
  doi = {10.3390/ma19112414}
}
Kostenlos starten →