Rheology and Shape Stability Control of 3D-Printed White Calcium Sulfoaluminate Cement Composites Containing Oyster Shell and Cuttlebone Powder
Materials · 05.06.2026 · 19 (11) · 2410
DOI: 10.3390/ma19112410 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 05.06.2026. Verfasst von Xingyu Qu und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Civil Engineering & Architecture, Qingdao Agricultural University, Qingdao 266109, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Shandong Province, Science and Technology Plan Project of Inner Mongolia Autonomous Region.
Abstract (Originalsprache)
To optimize the shape stability of 3D-printed white calcium sulfoaluminate (WCSA) cement composites, oyster shell powder (OSP) and cuttlebone powder (CBP) were introduced as white admixtures to regulate rheological properties and printability. The setting behavior, rheological properties, and shape stability of the WCSA cement composites were evaluated by Vicat setting-time tests, rotational rheological measurements, three-stage thixotropic recovery tests, and structural deformation measurements, together with mechanical strength tests, XRD, and SEM analyses. The results showed that the incorporation of OSP and CBP shortened the setting time of WCSA cement composites. The initial and final setting times decreased from 41 min and 67 min to 17 min and 30 min in the WCSA cement composites with OSP, and from 42 min and 66 min to 20 min and 33 min in the WCSA cement composites with CBP, which improved printing operability. As the OSP and CBP content increases from 0% to 24%, the dynamic yield stress of WCSA cement composites increased from 48.83 Pa to 530.59 Pa and 60.30 Pa to 1085.80 Pa, respectively. The thixotropic recovery degree of WCSA cement composites increased from 57.89% to 86.46%, and 56.60% to 92.14%, respectively. As the OSP and CBP contents increase from 0% to 24%, the structural deformation decreased from 12.39% to 6.91% and 13.29% to 5.12% respectively, which improved buildability of the printed structures. In addition, although OSP and CBP reduced the mechanical strength of WCSA cement composites compared with the control group, the flexural and compressive strengths gradually recovered as the contents increased from 6% to 24% due to the enhanced filling effect and improved particle packing. This study provides a reference for the application of marine calcareous solid wastes in sustainable 3D-printed cementitious materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Civil Engineering & Architecture, Qingdao Agricultural University, Qingdao 266109, China.
- Qingdao Product Quality Testing Research Institute, Qingdao 266061, China.
- Centre for Future Materials, University of Southern Queensland, Toowoomba, QLD 4350, Australia.
- State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, Wuhan 430070, China.
ORCID-Profile: Jiafeng Kong, Xingang Xu, Mingxu Chen
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Shandong Province
- Science and Technology Plan Project of Inner Mongolia Autonomous Region
- Top Talent Program of Qingdao Agricultural University
Zitieren
APA
Qu, X., Wang, Q., Kong, J., Wang, J., Wang, J., Xu, X., Zheng, Y., Wu, H., & Chen, M. (2026). Rheology and Shape Stability Control of 3D-Printed White Calcium Sulfoaluminate Cement Composites Containing Oyster Shell and Cuttlebone Powder. Materials, 19(11), 2410. https://doi.org/10.3390/ma19112410
Vancouver
Qu X, Wang Q, Kong J, Wang J, Wang J, Xu X, et al. Rheology and Shape Stability Control of 3D-Printed White Calcium Sulfoaluminate Cement Composites Containing Oyster Shell and Cuttlebone Powder. Materials. 2026;19(11):2410. doi:10.3390/ma19112410
BibTeX
@article{Qu2026,
author = {Qu, Xingyu and Wang, Qinyuan and Kong, Jiafeng and Wang, Junyu and Wang, Jie and Xu, Xingang and Zheng, Yan and Wu, Heyang and Chen, Mingxu},
title = {Rheology and Shape Stability Control of 3D-Printed White Calcium Sulfoaluminate Cement Composites Containing Oyster Shell and Cuttlebone Powder},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2410},
doi = {10.3390/ma19112410}
}
EUVIMED