Preparation and Properties of Transparent, Thermally Insulating, and Flexible SiO2 Aerogels
Materials · 04.06.2026 · 19 (11) · 2401
DOI: 10.3390/ma19112401 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.06.2026. Verfasst von Jian Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Chongqing Anting Environmental Protection Technology Co., Ltd., Chongqing 400064, China. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jiangsu Association for Science and Technology Youth Science and Technology Talent Support Project, Science and Technology Plan Project of the Special Equipment Safety Supervision Inspection Institute of Jiangsu Province.
Abstract (Originalsprache)
SiO2 aerogels are promising candidates for energy-efficient glazing because of their low thermal conductivity and optical transparency; however, conventional formulations often fail to reconcile optical, thermal, and mechanical performance. This work aimed to resolve this bottleneck via controllable sol–gel synthesis and ambient pressure drying. Using methyltrimethoxysilane (MTMS) as the single silicon source, this study systematically explored the effects of alkaline catalyst type, water-to-MTMS ratio, and surfactant selection, and further developed an MTMS–dimethyl dimethoxy silicane (DMDMS) composite silicon source. Tetramethylammonium hydroxide (TMAOH) catalysis, a water-to-MTMS molar ratio of 7:1, and Pluronic F-127 (F127) surfactant yielded a uniform, hydrophobic aerogel with 93.50% porosity and 89.74% transmittance at 800 nm. The optimized composite system (MTMS:DMDMS = 9:1, 6 mL water, 2.0 g F127) enhanced compressive strength by 22.4% relative to pure MTMS aerogel, with 70.15% visible transmittance and thermal conductivity of 0.027 W/(m·K). These results demonstrate that multi-parameter formulation control can achieve a practical balance among mechanical robustness, optical transparency, and thermal insulation. This study provides a theoretical and process foundation for the engineering application of high-performance transparent thermal insulation materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chongqing Anting Environmental Protection Technology Co., Ltd., Chongqing 400064, China.
- Jiangsu Key Laboratory of Process Enhancement and New Energy Equipment Technology, School of Mechanical and Power Engineering, Nanjing Tech University, Nanjing 211816, China.
- Special Equipment Safety Supervision Inspection Institute of Jiangsu Province, Nanjing 210036, China.
- Technology Innovation Center of Safety Operations and Maintenance for Oil and Gas Storage and Transportation Equipment Facilities for Jiangsu Province Market Regulation, Nanjing 210036, China.
ORCID-Profile: Xiaotian Peng
Förderung
- National Natural Science Foundation of China
- Jiangsu Association for Science and Technology Youth Science and Technology Talent Support Project
- Science and Technology Plan Project of the Special Equipment Safety Supervision Inspection Institute of Jiangsu Province
- State Key Laboratory of Materials-Oriented Chemical Engineering
Zitieren
APA
Li, J., Shi, S., Shu, H., Chen, Q., Zhou, Y., Yuan, Y., & Peng, X. (2026). Preparation and Properties of Transparent, Thermally Insulating, and Flexible SiO2 Aerogels. Materials, 19(11), 2401. https://doi.org/10.3390/ma19112401
Vancouver
Li J, Shi S, Shu H, Chen Q, Zhou Y, Yuan Y, et al. Preparation and Properties of Transparent, Thermally Insulating, and Flexible SiO2 Aerogels. Materials. 2026;19(11):2401. doi:10.3390/ma19112401
BibTeX
@article{Li2026,
author = {Li, Jian and Shi, Shuhang and Shu, Haitao and Chen, Qianyu and Zhou, Yun and Yuan, Ying and Peng, Xiaotian},
title = {Preparation and Properties of Transparent, Thermally Insulating, and Flexible SiO2 Aerogels},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2401},
doi = {10.3390/ma19112401}
}
EUVIMED