Biomechanical Behavior of Different Framework and Superstructure Material Combinations in Two-Implant-Supported Four-Unit Prostheses: A Dynamic Finite Element Analysis
Materials · 03.06.2026 · 19 (11) · 2376
DOI: 10.3390/ma19112376 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 03.06.2026. Verfasst von Niloofar Hajghani und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Faculty of Dentistry, Near East University, Near East Boulevard, Mersin 10, Nicosia 99138, Turkey. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The long-term success of implant-supported prostheses (ISPs) is strongly influenced by material selection, which affects stress distribution within the implant system and surrounding cortical bone. This study aimed to assess the biomechanical behavior of a four-unit ISP supported by two implants in the posterior region, using different framework and superstructure material combinations through dynamic finite element analysis (FEA).
Methods
A three-dimensional (3D) edentulous mandibular model was created using Mimics software, with two implants placed in the first premolar and second molar regions. Four framework materials—titanium (Ti), glass fiber–reinforced composite (GFRC), 3Y-TZP zirconia, and polyether ether ketone (PEEK)—were combined with two superstructure materials, 5Y-TZP zirconia and resin-matrix ceramic (RMC), forming eight groups. Dynamic loading simulated chewing forces, and stress distribution was analyzed using the von Mises criterion.
Results
The results demonstrated that 3Y-TZP zirconia frameworks generated the highest stress values across implants, abutments, and cortical bone. RMC crowns consistently produced lower stress than 5Y-TZP zirconia across all the groups. PEEK showed the highest displacement, followed by GFRC, zirconia, and Ti.
Conclusion
Materials with higher Young’s modulus tended to exhibit greater stress transfer to the implant, implant components, and cortical bone. In contrast, polymer-based materials may show a tendency toward greater deformation and displacement compared with metallic and ceramic materials.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Prosthodontics, Faculty of Dentistry, Near East University, Near East Boulevard, Mersin 10, Nicosia 99138, Turkey.
Zitieren
APA
Hajghani, N., & Günal-Abdulcelil, B. (2026). Biomechanical Behavior of Different Framework and Superstructure Material Combinations in Two-Implant-Supported Four-Unit Prostheses: A Dynamic Finite Element Analysis. Materials, 19(11), 2376. https://doi.org/10.3390/ma19112376
Vancouver
Hajghani N, Günal-Abdulcelil B. Biomechanical Behavior of Different Framework and Superstructure Material Combinations in Two-Implant-Supported Four-Unit Prostheses: A Dynamic Finite Element Analysis. Materials. 2026;19(11):2376. doi:10.3390/ma19112376
BibTeX
@article{Hajghani2026,
author = {Hajghani, Niloofar and Günal-Abdulcelil, Burcu},
title = {Biomechanical Behavior of Different Framework and Superstructure Material Combinations in Two-Implant-Supported Four-Unit Prostheses: A Dynamic Finite Element Analysis},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2376},
doi = {10.3390/ma19112376}
}
EUVIMED