EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Performance-Enhanced Parabolic Curved-Beam Lattice Structures: Multi-Objective Optimization and Theoretical Modeling

Dongdong Min, Qingshan Wang, Long Yu iD, Ziyun Jin, Rui Zhong

Materials · 02.06.2026 · 19 (11) · 2372

DOI: 10.3390/ma19112372 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 02.06.2026. Verfasst von Dongdong Min und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lattice structures offer superior mechanical properties, including lightweight design and performance tailorability, due to their unique geometric configurations and porous characteristics. This study proposes a novel lattice structure, namely the parabolic curved-beam (PCB) lattice structure, in which the struts within the unit cells are designed in a parabolic shape. Based on the principle of minimum potential energy, a theoretical model for the mechanical behavior of the proposed structure under compressive loading was derived. The influence of structural parameters on mechanical performance was systematically analyzed, and the accuracy and validity of the theoretical model were verified through experimental design. Additionally, the advantages of the structure were explored through comparison with the traditional body-centered cubic (BCC) lattice structure. Subsequently a response surface surrogate model was constructed using orthogonal experimental design, yielding quadratic regression equations for key mechanical indicators, including Young’s modulus, specific energy absorption (SEA), and yield strength. The results demonstrate that optimal mechanical performance is achieved with a strut curvature of 0.55 mm−1, a cross-sectional area of 1.22 mm2, and a unit cell size of 5 mm. Under these design parameters, the structure exhibits a Young’s modulus of 4152.85 MPa, an SEA of 3.86 J/g, and a yield strength of 17.02 MPa. The findings demonstrate that the present study employs theoretical analysis and optimization design to achieve mechanical characterization and performance optimization of the designed lattice structure. It shows broad application prospects in fields such as aerospace, vehicle engineering, and protective equipment, where there is an urgent demand for lightweight and high-strength materials. This work provides new insights and a theoretical basis for the design and performance optimization of multi-functional integrated structures in engineering practice.

Schlagwörter

Stichwörter der Autor:innen

lattice structuresmulti-objective optimizationnumerical simulationtheoretical modeling

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China.
  • State Key Laboratory of Precision Manufacturing for Extreme Service Performance, Central South University, Changsha 410083, China.

ORCID-Profile: Long Yu

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Min, D., Wang, Q., Yu, L., Jin, Z., & Zhong, R. (2026). Mechanical Performance-Enhanced Parabolic Curved-Beam Lattice Structures: Multi-Objective Optimization and Theoretical Modeling. Materials, 19(11), 2372. https://doi.org/10.3390/ma19112372

Vancouver

Min D, Wang Q, Yu L, Jin Z, Zhong R. Mechanical Performance-Enhanced Parabolic Curved-Beam Lattice Structures: Multi-Objective Optimization and Theoretical Modeling. Materials. 2026;19(11):2372. doi:10.3390/ma19112372

BibTeX
@article{Min2026,
  author = {Min, Dongdong and Wang, Qingshan and Yu, Long and Jin, Ziyun and Zhong, Rui},
  title = {Mechanical Performance-Enhanced Parabolic Curved-Beam Lattice Structures: Multi-Objective Optimization and Theoretical Modeling},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2372},
  doi = {10.3390/ma19112372}
}
Kostenlos starten →