Influence of High-Volume Calcined Phosphogypsum on Mechanical Properties and Freeze–Thaw Resistance of Supersulfated Slag Cement Concrete
Materials · 01.06.2026 · 19 (11) · 2330
DOI: 10.3390/ma19112330 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 01.06.2026. Verfasst von Fang Deng und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental and Biological Engineering, Wuhan Technology and Business University, Wuhan 430065, China. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hubei Provincial Sewage Resource Utilization Engineering Technology Research Center, Wuhan Technology and Business University, Science and Technology Department of Hubei Province.
Abstract (Originalsprache)
This study investigates the effects of high-volume calcined phosphogypsum (CPG) on the workability, mechanical properties, and frost resistance of phosphogypsum slag cement concrete (PSCC). CPG was used as a sulfate activator to prepare PSCC mixtures with CPG contents ranging from 40% to 70%. The slump, flexural and compressive strengths, water absorption, relative dynamic modulus of elasticity, and mass loss rate after freeze–thaw cycles were evaluated. The results show that the slump of fresh concrete decreases from 275 mm to 35 mm as the CPG content increases from 40% to 70%. The compressive strength decreases with increasing CPG content; however, the 90-day compressive strength still ranges from 39.9 MPa to 56.4 MPa. Even at high CPG contents, the concrete maintains moderate to relatively high strength levels. At a CPG content of 40%, the water absorption rate is 5.9%, meeting the requirement of the Chinese standard JC/T 899-2016. Freeze–thaw cycle tests indicate that a higher CPG content results in a higher mass loss rate. Nevertheless, all mixtures comply with the Chinese standard JC/T 899-2016, which limits the mass loss rate to no more than 3.0% after 50 freeze–thaw cycles for curbstones. The relative dynamic modulus of elasticity shows a trend of decreasing, then increasing, with increasing CPG content.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Environmental and Biological Engineering, Wuhan Technology and Business University, Wuhan 430065, China.
- School of Urban Construction, Wuhan University of Science and Technology, Wuhan 430065, China.
- Junji Environmental Technology Co., Ltd., Wuhan 430073, China.
- Hubei Provincial Engineering Research Center of Urban Regeneration, Wuhan 430065, China.
ORCID-Profile: Ling Tao, Yishun Liao
Förderung
- Hubei Provincial Sewage Resource Utilization Engineering Technology Research Center
- Wuhan Technology and Business University
- Science and Technology Department of Hubei Province
- Special Fund for Advantageous and Characteristic Disciplines (Group) of Hubei Province
- Open Fund Project of the Hubei Provincial Sewage Resource Utilization Engineering Technology Research Center
- Hubei Provincial Research Program of Construction Science and Technology
Zitieren
APA
Deng, F., Han, G., Xu, K., Jia, X., Zheng, D., Tao, L., Dong, J., & Liao, Y. (2026). Influence of High-Volume Calcined Phosphogypsum on Mechanical Properties and Freeze–Thaw Resistance of Supersulfated Slag Cement Concrete. Materials, 19(11), 2330. https://doi.org/10.3390/ma19112330
Vancouver
Deng F, Han G, Xu K, Jia X, Zheng D, Tao L, et al. Influence of High-Volume Calcined Phosphogypsum on Mechanical Properties and Freeze–Thaw Resistance of Supersulfated Slag Cement Concrete. Materials. 2026;19(11):2330. doi:10.3390/ma19112330
BibTeX
@article{Deng2026,
author = {Deng, Fang and Han, Guanjun and Xu, Kaiqin and Jia, Xiqiang and Zheng, Dan and Tao, Ling and Dong, Jun and Liao, Yishun},
title = {Influence of High-Volume Calcined Phosphogypsum on Mechanical Properties and Freeze–Thaw Resistance of Supersulfated Slag Cement Concrete},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2330},
doi = {10.3390/ma19112330}
}
EUVIMED