Ultrasonic Evaluation of the Adhesion Between Regenerative Coatings and Steel Substrates
Materials · 29.05.2026 · 19 (11) · 2313
DOI: 10.3390/ma19112313 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2026. Verfasst von Jakub Kowalczyk und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil and Transport Engineering, Institute of Machines and Motor Vehicles, Poznan University of Technology, 61-131 Poznan, Poland. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education in Poland.
Abstract (Originalsprache)
The rise in resource consumption and environmental pressures are driving the development of a circular economy, in which the remanufacturing of machine and vehicle parts plays a significant role. Despite numerous studies on regeneration technologies (including additive manufacturing, cladding, and spraying), the literature lacks analyses concerning the non-destructive evaluation of the coating–substrate bond quality—when tested from the substrate side. The aim of this study was to evaluate the applicability of the ultrasonic method for the detection of defects (delaminations, detachments) in the adhesive joint between the regenerative coating and the base material. The study demonstrated that the ultrasonic method enables non-destructive, portable, and single-sided inspection of the integrity of the coating–substrate interface, making it a useful tool in industrial practice. Fifteen samples (including one reference sample) of varying thicknesses (from 1.9 µm to 1753.9 µm) were tested using ultrasonic probes with frequencies ranging from 1 MHz to 20 MHz. It was found that the adhesion of coatings approximately 74 µm thick can be estimated using an ultrasonic wave with a frequency of 1.66 MHz, whereas for coatings approximately 250 µm thick, adhesion can be estimated using higher frequencies, i.e., from 2.75 to 20 MHz.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Faculty of Civil and Transport Engineering, Institute of Machines and Motor Vehicles, Poznan University of Technology, 61-131 Poznan, Poland.
- Faculty of Mechanical Engineering, Institute of Materials Technology, Poznan University of Technology, 61-131 Poznan, Poland.
ORCID-Profile: Jakub Kowalczyk, Waldemar Matysiak
Förderung
- Ministry of Higher Education in Poland
Zitieren
APA
Kowalczyk, J., Jósko, M., & Matysiak, W. (2026). Ultrasonic Evaluation of the Adhesion Between Regenerative Coatings and Steel Substrates. Materials, 19(11), 2313. https://doi.org/10.3390/ma19112313
Vancouver
Kowalczyk J, Jósko M, Matysiak W. Ultrasonic Evaluation of the Adhesion Between Regenerative Coatings and Steel Substrates. Materials. 2026;19(11):2313. doi:10.3390/ma19112313
BibTeX
@article{Kowalczyk2026,
author = {Kowalczyk, Jakub and Jósko, Marian and Matysiak, Waldemar},
title = {Ultrasonic Evaluation of the Adhesion Between Regenerative Coatings and Steel Substrates},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2313},
doi = {10.3390/ma19112313}
}
EUVIMED