EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Study of Sustainable Mortars Incorporating Copper Slag and Zeolites

Santiago Rosado, Leticia Presa Madrigal, Luis Felipe Mazadiego, Juan Llamas iD, Lidia Gullón, Domingo Alfonso Martín iD, Jorge Luis Costafreda iD

Materials · 29.05.2026 · 19 (11) · 2302

DOI: 10.3390/ma19112302 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.05.2026. Verfasst von Santiago Rosado und 6 weiteren Autor:innen. Beteiligte Einrichtung: Universidad Polítecnica de Madrid, Calle Ríos Rosas, 21, 28003 Madrid, Spain. Die Arbeit nennt 95 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EIT RawMaterials, RIS-CuRe, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The generation of slag from copper smelting is between 40 and 45 Mt per year. However, the utilisation of this material in large-scale applications remains limited. This study evaluates the combined use of copper slag as a fine natural aggregate substitute (50, 75, and 100%) and natural mordenite-type zeolite as a partial cement replacement (25, 40, and 55%) in the development of sustainable mortars. The samples were characterised using XRF, particle size distribution, and density analysis, and sixteen mixtures were produced. The consistency and water demand in fresh state, the flexural and compressive strength at 7 and 28 days, and the porosity measurements of the hardened mortars were analysed. The results demonstrate that zeolite significantly increases water demand, leading to higher porosity (27–34%) and reduced mechanical strength (14–31 MPa). Conversely, copper slag decreases the water-to-cement ratio and produces denser matrices with the lowest porosity values (8–13%), achieving compressive strengths at 28 days that are higher (53–58 MPa) than the reference mortar (50 MPa). In hybrid mixtures, slag partially mitigates the porosity increase induced by zeolite, revealing a favourable interaction between both materials. Mixtures containing 75–100% copper slag and 25% zeolite (MZ-8 and MZ-9) exhibited balanced porosity (18–21%) and mechanical performance (38–39 MPa), confirming their suitability for mortar applications. The findings demonstrate that the joint incorporation of copper slag and natural zeolite is a viable strategy for producing eco-efficient mortars while reducing clinker and natural aggregate consumption.

Schlagwörter

Stichwörter der Autor:innen

cementcopper slagmortarnatural zeolitewater demand

Autor:innen und Institutionen

  • Universidad Polítecnica de Madrid, Calle Ríos Rosas, 21, 28003 Madrid, Spain.
  • Fundación Gómez Pardo, Calle Alenza, 1, 28003 Madrid, Spain.
  • Laboratorio Oficial para Ensayos de Materiales de Construcción (LOEMCO), Calle Eric Kandell, 1, 28906 Getafe, Spain.

ORCID-Profile: Juan Llamas, Domingo Alfonso Martín, Jorge Luis Costafreda

Förderung

  • EIT RawMaterials
  • RIS-CuRe
  • European Union

Zitieren

APA

Rosado, S., Madrigal, L. P., Mazadiego, L. F., Llamas, J., Gullón, L., Martín, D. A., & Costafreda, J. L. (2026). A Study of Sustainable Mortars Incorporating Copper Slag and Zeolites. Materials, 19(11), 2302. https://doi.org/10.3390/ma19112302

Vancouver

Rosado S, Madrigal LP, Mazadiego LF, Llamas J, Gullón L, Martín DA, et al. A Study of Sustainable Mortars Incorporating Copper Slag and Zeolites. Materials. 2026;19(11):2302. doi:10.3390/ma19112302

BibTeX
@article{Rosado2026,
  author = {Rosado, Santiago and Madrigal, Leticia Presa and Mazadiego, Luis Felipe and Llamas, Juan and Gullón, Lidia and Martín, Domingo Alfonso and Costafreda, Jorge Luis},
  title = {A Study of Sustainable Mortars Incorporating Copper Slag and Zeolites},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {11},
  pages = {2302},
  doi = {10.3390/ma19112302}
}
Kostenlos starten →